Panorama Great White Antenna - Thread Extender suggestions.

[Randomstop]

Hello everyone!

I’m currently in Europe, specifically in Spain, and I’m planning to install the Panorama LPMM-6-60 antenna (Great White) on the roof of my motorhome.

Upon receiving the antenna, I noticed that the spigot is only 10-15mm long, while my roof is approximately 35mm thick. Consequently, I’ll need a spigot that’s about 40-45mm long (or a hollow extension of around 25-30mm).

I found that Maxview in the United Kingdom (https://maxview.co.uk/product/roam-thread-extender/) sells their thread extender, which might fit my needs. However, I couldn’t find it in the European Union (EU) or Spain.

I’m certain that some of you have excellent ideas on how to proceed without this specific part (or how to obtain it in the EU).

I would greatly appreciate any suggestions you may have.

Thank you very much!

 

[Randomstop]

I found the Panorama part numbers for the extender - Panorama M18-EXT or Panorama M18-EXT-SLT, but they are also not available anywhere in EU (and about 3 times as expensive as Maxview part)...

 

[zac]

I would get some 3d printed if not able to source them direct.
Or try Costar I brought the 5g antenna from these and they supplied the extension

 

[Randomstop]

I would get some 3d printed if not able to source them direct.
Or try Costar I brought the 5g antenna from these and they supplied the extension

I already have the antenna and Costar is in the U.K. Even if they ship to EU (and it seems they don’t), the price of the extender would be close to the price of the antenna itself… 3d printing may be possible, but steel part would be more desirable… thanks!

 

[Randomstop]

Well, if anyone has Maxview Roam antenna not installed, what is the thread size on the spigot? Is it M18x1.5 or M18x1? Thank you!

^{_{Subscribers  do not see these advertisements}}

 

[Manic]

This is on their website