Mounting a fire extinguisher.

[G-RMPS]

I would like to mount my new Firexo extinguisher in my Malibu van, on the plastic louvred cover behind the drivers seat base and adjacent to the woosh-bang door. I thought the cover just hinged down like the one at the front of the seat base. It appears that I'm wrong. Anyone know how to open/remove this panel?

Thanks...Keith

 

[Revolvor]

This thread was started last week:

https://www.motorhomefun.co.uk/forum/threads/removing-the-plastic-cover-at-rear-of-seat.338086/

 

[Landy Andy]

Two clips on top. Two locating prongs high up. Two hooks low down.

 

[PeteandCher]

And the locating clips will almost certainly be broken!

 

[BouncyBoatFolk]

Some additional heat from a hair dryer is sometimes helpful. Ease the top tangs upwards whilst maintaining a gentle pulling pressure on the louvre. I found an old butter knife to be the ideal tool for lifting the top clips. Good luck.
Mike.

 

[L' Hobo]

I've heard of sex starved, but that's ridiculous!

Oops, sorry! Should have read the following post.

 

[Ingwe]

Like most things it’s easy when you know how. Stick a flat blade where shown on either side in the photo and lift the little tag UP. The top then drops down and easy to unhook it at the bottom.

 

[G-RMPS]

I was pushing down!

Apologies for the thread duplication. I never saw the connection between my post and last week's one with the same question.

^{_{Subscribers  do not see these advertisements}}

 

[Ingwe]

I was pushing down!

Me too, at first.