Hymer high level marker Jokon spl2010? Lens removal & bulb (1 Viewer)

[SandraL]

Jokon SPL2010 12.0013.030 Caravan Motorhome Red White End Outline Side Marker Light Lamp - H Bowers

Jokon SPL2010 12.0013.030 Caravan Motorhome Red White End Outline Side Marker Light Lamp from H Bowers who specialise in the sale of automotive components.

www.bowerspartsonline.co.uk

I think our hymer 2013 has these high level white/red marker lights.
Two questions
1 Does the lens cover come off without damage, how?

2 led replacement festoon bulb will need to shine forward and back. Most festoon replacements are single sided.
Anyone care to recommend suitable led replacement?

 

[icantremember]

Jokon SPL2010 12.0013.030 Caravan Motorhome Red White End Outline Side Marker Light Lamp - H Bowers

Jokon SPL2010 12.0013.030 Caravan Motorhome Red White End Outline Side Marker Light Lamp from H Bowers who specialise in the sale of automotive components.

www.bowerspartsonline.co.uk

I think our hymer 2013 has these high level white/red marker lights.
Two questions
1 Does the lens cover come off without damage, how?

2 led replacement festoon bulb will need to shine forward and back. Most festoon replacements are single sided.
Anyone care to recommend suitable led replacement?

I can't help with replacement bulb, but yes, the clear lens just unclips from one end by lifting it with a finger nail or pen knife.

 

[DavidG58]

Has the bulb gone?

if not I would leave well alone and when it dies swap like for like, there is no real incentive to use LED

^{_{Subscribers  do not see these advertisements}}

 

[SandraL]

Its intermittant, but when the mot man gave it a tap it worked today

With no screws holding lens I assumed it prised off/ unclipped but good to know for sure. Thanks.

Am hoping led will outlive need to remove lens again but no good if it only shines one direction.

 

[icantremember]

I agree with DavidG58 and can see no benefit in going LED as you will normally only only have them on with the engine running therefor no effect on leisure batteries.

As a matter of interest I bought 2 complete new lights last week as one of mine has some moisture in it.

 

[icantremember]

Its intermittant, but when the mot man gave it a tap it worked today☺

With no screws holding lens I assumed it prised off/ unclipped but good to know for sure. Thanks.

Am hoping led will outlive need to remove lens again but no good if it only shines one direction.

Probably corrosion on the bulb contact due to moisture.

They are very easy to flick off, in fact I'm surprised they don't get knocked off with overhanging branches.

^{_{Subscribers  do not see these advertisements}}

 

[SandraL]

Good to hear they come off easily. I had visions of having to warm them first, will still do, and even then breaking the locking tab!

 

[gus-lopez]

you can get led's that have faces all the way around. You can here anyway