- Nov 19, 2019
- 793
- 2,605
- Funster No
- 66,935
- MH
- Challenger 287GA
- Exp
- Since 2020
Just wanted to share this tip with other owners of Challenger/Chausson vans. If you have the push-fit fresh water "bung" you'll know what a PITA it is to remove and replace every time you want to dump your fresh water tanks. I was sick of it after doing it once, let alone more than that! This is widely shared on various owners groups but in case you have one of these vans and aren't in those groups, I thought I'd share it here.
Look for one of these:
Its a 15mm push-fit isolation valve. I've included a link to a UK reseller here for ease, but you can find them really easily in the UK (Not the case in Poland as I had to get one from the UK myself!!).
The second is to make it easier to fill your fresh water tank if you have one of the flip-out filling "elbows". The cap is size s60X6 (DIN 6131). Get a hozelock adaptor for the cap like this one:
a link for this is <Broken link removed> as well. Both of these have made my life SO much easier in the past month! Enjoy!
Look for one of these:
Its a 15mm push-fit isolation valve. I've included a link to a UK reseller here for ease, but you can find them really easily in the UK (Not the case in Poland as I had to get one from the UK myself!!).
The second is to make it easier to fill your fresh water tank if you have one of the flip-out filling "elbows". The cap is size s60X6 (DIN 6131). Get a hozelock adaptor for the cap like this one:
a link for this is <Broken link removed> as well. Both of these have made my life SO much easier in the past month! Enjoy!