Getting Bored now 2, Still Bored !!

[minesapint]

Hi all, in a previous post I fitted new radio/CD/Sat nav/Camera thingy and new heat/air con controls in MoHo, cut grass, sat in the garden to admire my efforts, drank too much Speckled Hen.

Still Bored so I jacked up the Moho and put it on axle stands, took all the wheels off (who needs a wheel lock) to have a look at the brake pads etc. I then had a light bulb moment. Why not replace all the wheels with nice shiny alloys.

Back into house on the computer and found a set of alloys. It was at this moment SWMBO pointed out we were on lockdown and even if I got the new wheels delivered where could I get the tyres fitted to them, even if I could get to a tyre fitters, ""as we are on lockdown"".

I pondered the situation for a moment then pressed buy. I will cross the fitting bridge when I get to it. ??

Pic 1 Moho with no feet
Pic 2 Old wheels and trims.
Pic 3 & 4 New shiny alloys

More on this later.

 

[Mark McG]

Love the Alloys - what are they and where did you find them?

 

[lunarman]

minesapint all the tyre fitting centres around here are open for business as they are considered essential for keeping nhs and essential workers mobile.
Rather than taking your wheels to a fitting centre could you find a mobile fitter who would come to you.

 

[Winger]

Look lovely,
Are you selling the old rims. If so could you pm me with size and price please

 

[minesapint]

Love the Alloys - what are they and where did you find them?

Hi I have attached a link to the site for the Alloys, which are genuine ford parts.
eBay item number:
192701133504
Sold by chasedotnet

^{_{Subscribers  do not see these advertisements}}

 

[minesapint]

minesapint all the tyre fitting centres around here are open for business as they are considered essential for keeping nhs and essential workers mobile.
Rather than taking your wheels to a fitting centre could you find a mobile fitter who would come to you.

Yes I thought of that but I may leave it a few weeks until things get better.

 

[Ranger]

Well at least that is one motorhome that is safe from being stolen, at least for now.

 

[Dazza 6863]

Hi all, in a previous post I fitted new radio/CD/Sat nav/Camera thingy and new heat/air con controls in MoHo, cut grass, sat in the garden to admire my efforts, drank too much Speckled Hen.

Still Bored so I jacked up the Moho and put it on axle stands, took all the wheels off (who needs a wheel lock) to have a look at the brake pads etc. I then had a light bulb moment. Why not replace all the wheels with nice shiny alloys.

Back into house on the computer and found a set of alloys. It was at this moment SWMBO pointed out we were on lockdown and even if I got the new wheels delivered where could I get the tyres fitted to them, even if I could get to a tyre fitters, ""as we are on lockdown"".

I pondered the situation for a moment then pressed buy. I will cross the fitting bridge when I get to it. ??

Pic 1 Moho with no feet
Pic 2 Old wheels and trims.
Pic 3 & 4 New shiny alloys

More on this later.

Pic 3 (Alloy Wheels) looks like standard rubber valves, i recommend changing them to metal high-pressure ones, IMO are a lot safer.

 

[minesapint]

Look lovely,
Are you selling the old rims. If so could you pm me with size and price please

Pic 3 (Alloy Wheels) looks like standard rubber valves, i recommend changing them to metal high-pressure ones, IMO are a lot safer.

Hello thanks for your post, the wheel sizes and info is hopefully readable from the first picture, it reads 5 1/2 J x 16 x 56. The tyres I am removing are 215/75 R16C if that helps.
Do you want the wheel trims as well.

Pricewise the wheels have only covered 20K miles and are in excellent condition, new I think they are about £65, would £30 each be OK and the trims at £7.50 each. + postage, I am open to sensible offers..

 

[minesapint]

Pic 3 (Alloy Wheels) looks like standard rubber valves, i recommend changing them to metal high-pressure ones, IMO are a lot safer.

Thanks for mentioning the valves, the new ones have metal centres but I may change them to the stainless ones that can be tightened up with a nut on the valve stem.

^{_{Subscribers  do not see these advertisements}}

 

[minesapint]

Look lovely,
Are you selling the old rims. If so could you pm me with size and price please

Hi I apologise if it seems I did not get back to you, I inadvertently sent it to another post
Thanks for your post, the wheel sizes and info is hopefully readable from the first picture, it reads 5 1/2 J x 16 x 56. The tyres I am removing are 215/75 R16C if that helps.
Do you want the wheel trims as well.

Pricewise the wheels have only covered 20K miles and are in excellent condition, new I think they are about £65, would £30 each be OK and the trims at £7.50 each. + postage, I am open to sensible offers..