Fiat Ducato 2015 on Motorhome Dash Phone, Map, Tablet, Ipad Holder, Pt No 735653789

[Dorset Diver]

Holder

Anyone fitted and using one of the above. It looks good, is quite expensive, but appears to be useful. Comments please.

 

[Al-Di]

waiting for them to get back to me with P&P

https://rover.ebay.com/rover/1/707-...2&toolid=10001&campid=&icep_item=264610560856

 

[Lenny HB]

2015 is the crossover year I think so is yours an X250 or an X290 because they could not be fitted to an X250 with a passenger airbag, I don't know why.

 

[JustifiedAncient]

Holder

Anyone fitted and using one of the above. It looks good, is quite expensive, but appears to be useful. Comments please.

My 2019 Fiat Ducato came with this fitted as standard, so I was spared the cost of buying one later. Definitely worth having, but also worth noting a couple of things:
1) The jaws will only hold a phone in portrait mode rather than landscape that I would otherwise use for Sat Nav.
2) I didn't realise at first that you needed to push the lever back flush to clamp the phone etc after positioning it.
3) It can obscure the drivers view a bit, when in use but not too much to be a nuisance.
4) To pull it up you have to reach forward and pull via the clipboard holder at the top. OK if you have long arms.

Otherwise, all good.

 

[Dorset Diver]

2015 is the crossover year I think so is yours an X250 or an X290 because they could not be fitted to an X250 with a passenger airbag, I don't know why.

Lenny HB

Good point, and I'm not sure so I need to check. A while back I was told that the existing device could not be raised because of something to do with the airbag, however, I gave ours a yank and up it came. Just a sticky clip me thinks. I can't see how it would affect the airbag which is well to the left of the media unit but one never knows.

^{_{Subscribers  do not see these advertisements}}

 

[Landy Andy]

I fitted one to my X250. Holds my iPad nicely