Drop down bed in Rapido 604ff

[Jaybee57]

Good afternoon. I’m excited to be trading in my Rapido V53 for a Rapido 604ff.
I have read that if the bed won’t move electrically I can use a socket to wind it manually.
please can you tell me what I should buy, I believe there is a drill fitment, does the drill need to be very powerful or will my lightweight battery one do it?
Thanks for your advice.

 

[Wombles]

Is it a Project 2000 bed? Know that a lot of these required an allen key - reset instructions here https://www.motorhomefun.co.uk/forum/threads/electric-bed-wont-go-back-up.230656/#post-4191122 .
Hopefully a Rapido owner will be along to advise soon.

 

[the1andonly]

A 5mm allen key fitted to a battery drill will do the job.
I've done it on mine just to try it out. Never had the need to do it manualy in the 4 years ive had the 604. Just remember to turn key off each time you use it.

 

[the1andonly]

2 things if you manualy move the bed when back to electric movement, move it down and up to to rest to zero the movement.
When bringing the bed down remember to check the position of the front seat backs.i normally swivel the seats out of the way.