double bed Avantgarde 100

[macski]

Hi every one
How do I make up the double bed in an 2002 avantgarde 100. I have pulled out the two extensions from the dinette seats and pulled the slats out which only go to the end of the seats can any one tell me what goes between the extensions I seem to be a bit missing . I have all the cushions for the bed.
Sorry this is a bit long winded any help or advise as to what I should be looking for would be gratefully received.
macski

 

[Geo]

Usually the table is used if not your a bit of ply shortoh:

 

[GJH]

You should have a piece of board which goes between the two extensions. See photos - first shows it with the extra cushions. Second shows it in place.

Graham

 

[macski]

thanks

worked it out but have bits missing

macski

 

[macski]

Hi all

can anyone tell me what the purpose of the hinged back rest of the dinette seat is for

at the drivers end

thanks

macski

^{_{Subscribers  do not see these advertisements}}

 

[GJH]

Hi all

can anyone tell me what the purpose of the hinged back rest of the dinette seat is for

at the drivers end

thanks

macski

It's because it supports the backrest from the rear dinette seat when the bed is made up. That cushion is wedge shaped so the hinged piece levels it out.

I think I've a diagram somewhere on the main PC but it isn't on this netbook. I'll look for it and post it when we get back later this week

Graham

 

[GJH]

Here is the diagram.

A is the backrest cushion from the forward facing dinette seat.
B is the seat cushion from the forward facing dinette seat.
C is the seat cushion from the rearward facing dinette seat.
D & E are the two extra cushions.

Graham