Control Panel

Discussion in 'Introduce Yourself' started by Newc, Sep 12, 2016.

  1. Newc

    Newc

    Joined:
    Sep 12, 2016
    Messages:
    1
    Location:
    glasgow
    Ratings:
    +0
    Hello
    I have a 1996 Hymer B644.
    I have just had the wheel bearings done and on my return i checked the control panel. The indicator for the leisure battery was working but the 'Test Batterie 1' for the starter battery didn't move.
    I have an Electroblok 104-2. Is this a fuse problem? If so, where is the fuse ? Is there a right or wrong way to replace the fuse (turn things off for example before changing the fuse).
    I am new to this but one thought was that the mechanics might have left the key in the ignition in order to maneuver the wheels (they had it in over the weekend). However, it started up fine when I picked it up.
    Any ideas?
     
  2. f6c

    f6c Funster

    Joined:
    Nov 7, 2010
    Messages:
    3,792
    Location:
    gloucestershire
    Ratings:
    +1,193
    Welcome aboard;)
     
  3. wigster

    wigster Funster

    Joined:
    Feb 4, 2016
    Messages:
    1,812
    Location:
    Not lost but not far off
    Ratings:
    +1,533
    :welcome4:
     
  4. PeteS

    PeteS

    Joined:
    Sep 12, 2016
    Messages:
    62
    Location:
    Tunbridge wells
    Ratings:
    +64
    In mine they are under the near side seat. With the door open a pannel under the seat comes off for easy access. Mine is a 99 though so might be different. Good luck
     
  5. ambulancekidd

    ambulancekidd Funster

    Joined:
    Sep 23, 2014
    Messages:
    1,266
    Location:
    Ayrshire Scotland
    Ratings:
    +5,062
  6. buttons

    buttons Funster

    Joined:
    Aug 27, 2009
    Messages:
    15,737
    Location:
    Hertfordshire
    Ratings:
    +16,118
    Hi and Welcome.......(y)
     
  7. Bart

    Bart Funster

    Joined:
    Jun 4, 2016
    Messages:
    1,995
    Location:
    N.Ireland
    Ratings:
    +1,045
    Hi and :WelcomeFlag:
     

Share This Page