Chausson 718 Welcome 2015 Atmospheric Lights Failure (1 Viewer)

[Windy66]

Hi

The Atmospheric lights have stopped working when you switch them on via the switch next to the habitation door. I checked the fuses in the main electrical distribution panel and also the 5A fuses in the 'boite relais securite' boxes. Everything is fine.

I did find a circuit diagram online via Google from Marc Leisure that looked similar but I can't see any other protection.

Has anybody got any experience in this regard before I take it back to the dealer for what would (no doubt) be a lengthy and expensive fix?

 

[andy63]

Im afraid the diagram or schematic i got with the 620 isnt a great deal of use..
Im assuming you are talking about the blue floor mounted led's...
If they have all gone off its nearly certainly a fuse or a dodgy connection before or up to the switch..
Id check for voltage the switch and see if you can identify where it gets its feed from.. think all my lighting isi on fuses 4 & 5 in the main fuse box... im not sure why you would check the 5 amp fuses in the boite realis other than the main control panel would need to be on for the lights to work..
Ill photo it and post...just in case its any use..
Andy..

 

[andy63]

Sorry..see if i can get the picture the right way up

^{_{Subscribers  do not see these advertisements}}

 

[Windy66]

Fantastic - many thanks for posting this. It looks like it confirms your view - I need to check if there is a wire off.

The blue LEDS, the central pillar illumination, the curved strip in the roof bed and some illumination next to the kitchen window - all not working.

Thanks again so much.

 

[Geoff185]

Can you get the switch out to see if you have any power getting to it ? At least them you can track if it's between fuse abd switch or switch to lights

 

[Windy66]

Dunno, I've not tried. I'll have a go now. But I have checked if there is power at the fuse and there is.

Later...
I just tried to get the switch surround off but I can't see how it comes off. And I don't want to damage the surround or the back. I'll assume I need something like a Stanley knife blade, slip it under and lever it off carefully.

I'll give it another go.

^{_{Subscribers  do not see these advertisements}}

 

[Windy66]

Update: The guys that fix my MH found a fuse behind the control panel. Fuse replaced. Lights now work.