Cab mat fasteners

Nov 5, 2019
299
622
Arkley
Funster No
66,632
MH
Corinium Duo
Exp
One year in...
Hi Folks,

I note that the cab mats are not fastened down. Whilst they sit nicely on a couple of studs, there seems to be no means of clipping/screwing them down. I've had a quick look around and now confused as to what I need as some suppliers only mention car models and not vans. Can anyone please point me in the right direction?

Thanks again.
 

M-J

Visiting Coventry
Jan 15, 2019
2,319
5,203
Secret Underground Chimp Bunker
Funster No
58,012
MH
Bessacarr E562
Exp
Enough

You can also get just the studs on Amazon or eBay if you have a way of fitting them.
 
Mar 6, 2008
45
55
Spixworth
Funster No
1,722
MH
Van Conversion
Exp
Since 2006
As mentioned they are easy to buy from Amazon or Ebay https://www.ebay.co.uk/itm/12432417...d=link&campid=5338547443&toolid=20001&mkevt=1 A warning though, be very careful when drilling the hole neccessary to fix the middle. Check,check and check again that there are no cables under thr rubber mat. You will also need a hole punch https://www.ebay.co.uk/itm/26381067...d=link&campid=5338547443&toolid=20001&mkevt=1 luck

Subscribers  do not see these advertisements

 
OP
Andacami
Nov 5, 2019
299
622
Arkley
Funster No
66,632
MH
Corinium Duo
Exp
One year in...
Thanks for the pointers. Just to reiterate, I have the bases, just not the tops/heads/clamps whatever they are called. I "think" these might be the ones, am I right?

I know a photo would help, I'll go get one later...
 

TCG

Jul 6, 2017
1,021
1,443
Salford Priors
Funster No
49,363
MH
Autotrail Delaware
Exp
2016
These are what you need from Amazon

1626102744224.png
1626102744481.png
 
OP
Andacami
Nov 5, 2019
299
622
Arkley
Funster No
66,632
MH
Corinium Duo
Exp
One year in...
At last some photos. This is what I have, but not the pieces that should pop into the hole and twist-lock.

20210716_090453.jpg
20210716_090449.jpg
 
Top