Burstner table

AlunandFelicie

LIFE MEMBER
Joined
Aug 20, 2018
Posts
873
Likes collected
10,755
Funster No
55,743
MH
Burstner lyseo time
Anyone have a suggestion on how to remove rings made on a table by placing too hot tea mug on top (asking for a friend 🙂)
 
I went to a local timber merchants and got an off cut worktop made to the same size as the motorhome one, bit of matching trim and all for under £20, took the *old one* off and will re fit when we sell on. have had things drop on motorhome tables and punch holes in them and have also had a friend who made marks with too hot objects!
 
I went to a local timber merchants and got an off cut worktop made to the same size as the motorhome one, bit of matching trim and all for under £20, took the *old one* off and will re fit when we sell on. have had things drop on motorhome tables and punch holes in them and have also had a friend who made marks with too hot objects!
After some way to ‘polish’ off marks rather than replace top 😊 (easy life🤪)
 
The Coops was the old one easy to get off please? Where did you take it to have new one made?

Subscribers  do not see these advertisements

 
The Coops was the old one easy to get off please? Where did you take it to have new one made?
Held on with eight screws underneath and took it to Savoy Timber in Preston on Fylde Road. They have acres of worktop ends up to 1500mm in length in a wide variety of thickness and materials from £5 upwards and a cutting service plus the trim to match, the trim is held on with a contact adhesive and when properly dry just trimmed off with a sharp knife and gently sanded down, saves a fortune, Took the *old* one as a template, *someone* (no names no pack drill!) in my family has previous for dropping sharp/heavy objects onto motorhome tables and they are usually eggbox construction to save weight and not very strong. the *old one* is stored away and will be refitted when/if we sell the van Total cost for worktop cutting and trim was £20 and £1.88 for the glue, I had the knife and sandpaper, its very easy once the cutting has been done.
 
One of the first things I do when we get a new MH is either remove the table top and put in my own or ensure that the original is totally enclosed/protected with padding on top and plastic table cover ... it's difficult to teach dogs not to scratch or chew them so best be safe!
 
In the past I on the recommendation of others used a mix of furniture polish like Mr Sheen with Brasso and it worked a treat
 
In the past I on the recommendation of others used a mix of furniture polish like Mr Sheen with Brasso and it worked a treat
Worth a try ,thanks

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top