Alko Chassis plate location ?

[orridge]

We have a 2009 Chic eline i47 and trying to find the location of the Alko weight plate, we have both the Carthago and Fiat weight plate but not the Alko.

SV Tech thought under the bonnet but its still alluding me.

 

[Minxy]

Left hand side inside at the front of the cab step/footwell.

 

[Drum Major]

Try back rear wheel driver side on chassis

 

[orridge]

Left hand side inside at the front of the cab step/footwell.

Unfortunately only the Fiat plate is there.

 

[Lenny HB]

As Drum Major says normally on the chassis near the rear axle.

^{_{Subscribers  do not see these advertisements}}

 

[orridge]

Try back rear wheel driver side on chassis

Nope not there either unless the towbar fittings cover it up.

 

[Lenny HB]

Nope not there either unless the towbar fittings cover it up.

Not that far back, normally on the side of the chassis in front of the axle.

 

[orridge]

Not that far back, normally on the side of the chassis in front of the axle.

Nope definitely not in that position ;-(

 

[Wagoneer]

I have a 2010 Chic and only have the Fiat plate (which is basically blank) and the Carthago sticker which gives the permissable axle loadings etc.

I have an AL-CO plate on the chassis adjacent the offside rear wheel but it's just a reference number.

The Carthago sticker is the only one that is legally recognised as it's the last one in the build process.

 

[Minxy]

Unfortunately only the Fiat plate is there.

Do you have a UK passenger door?

^{_{Subscribers  do not see these advertisements}}

 

[Minxy]

If all else fails give Go European a ring as they told us where ours was.

 

[SIFTA SAM]

My (Hymer) Alko stick-on label is situated under the bonnet next to the Fiat riveted weights plate, on the left-hand side (looking at vehicle), on the main upper cross-member.

 

[orridge]

Do you have a UK passenger door?

Yes and the Fiat plate is there but not the Alko one.

 

[Drum Major]

Behind the drivers side wheel on the chassis

 

[orridge]

Behind the drivers side wheel on the chassis

This is all I could find behind the drivers wheel which I guess is a serial number not a weight so will try Alko direct.

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

OK on a Hymer but every Al-Ko chassis we have had its been on the RHS on the side of the chassis in front of the axle.
Just taken a pic this is what the Al-Ko plate is like.

 

[Wagoneer]

Just checked my AL-CO plate on 2010 Carthago. Same style as pic posted by Lenny HB , RHS above jacking point.

Permissable rear axle load is shown as 2400kg which is same as shown on Carthago plate.

 

[Minxy]

No plate on the actual axle on our Carthago, just the sticker inside.

 

[Lenny HB]

No plate on the actual axle on our Carthago, just the sticker inside.

Won't be on the axle but on the side of the chassis.

 

[orridge]

Thanks for all the help everybody I have been up and down both sides inside and out of the chassis around the engine bay and behind the wheels and nothing there however SV Tech seem ok with the Fiat and Carthargo plates to uprate.

Cheers All.

^{_{Subscribers  do not see these advertisements}}