Deeps
Free Member
Hi, I've just joined the forum but I have been viewing info on interesting topics in the past and everybody seems to be very helpful.
My problem at the moment is I had a leak from my Ultrastore Water Heater (10ltr) and having panicked with the amount of water mixing with electrics disconnected the pcb and removed it.
I found the water leak is the seal on the element so disconnected the cold water input and put a 12mm stop in line so we could at least have toilet flush and cold taps.
Having now relaxed a bit I noticed the remote connector on the cable has 5 connections on it however the connector on the pcb has 6. Now I can connect it using the 5 pins nearest to the pcb edge or furthest, which is it to be? I can take photos if required tomorrow.
Thanks in advance, Ray.
My problem at the moment is I had a leak from my Ultrastore Water Heater (10ltr) and having panicked with the amount of water mixing with electrics disconnected the pcb and removed it.
I found the water leak is the seal on the element so disconnected the cold water input and put a 12mm stop in line so we could at least have toilet flush and cold taps.
Having now relaxed a bit I noticed the remote connector on the cable has 5 connections on it however the connector on the pcb has 6. Now I can connect it using the 5 pins nearest to the pcb edge or furthest, which is it to be? I can take photos if required tomorrow.
Thanks in advance, Ray.