Habitation window etching

Discussion in 'Motorhome Security' started by Newfie, Aug 6, 2016.

  1. Newfie

    Newfie Funster

    Joined:
    Jul 5, 2016
    Messages:
    71
    Likes Received:
    38
    Location:
    Essex
    I used to have a caravan CHIS registered with all the windows etched with its Reg number. Does anybody know if there any etching kits out there where I can etch the registration number on all the hab Windows?
    I can find this for glass but not the plastic hab Windows.
     
  2. Wombles

    Wombles Funster

    Joined:
    Oct 28, 2013
    Messages:
    2,143
    Likes Received:
    1,709
    Location:
    Somerset
    Retainaguard http://www.retainagroup.com/ are a company that manufacture kits & mostly sell via retailers - on my To Do List to check with them what is possible so if you find anything out please post :) We are considering etching for all windows & catalytic convertor on both our motorhome & car plus all our bikes!
     
  3. icantremember

    icantremember Funster

    Joined:
    Sep 2, 2010
    Messages:
    5,053
    Likes Received:
    7,093
    Location:
    Nr Watton in Norfolk
    This guy always went around the campers at Peterborough Show .... He uses a small sand blaster with a stencil to etch windows, mirrors & headlights etc. We had our last 2 m/hs done by him for about £15 a time and will have him do our new one when I'm up his way. .........

    http://www.misterwhat.co.uk/company/1452664-securi-mark-lincoln
     
    • Informative Informative x 1
  4. icantremember

    icantremember Funster

    Joined:
    Sep 2, 2010
    Messages:
    5,053
    Likes Received:
    7,093
    Location:
    Nr Watton in Norfolk
    Have just found his name and mobile number ;- Nigel Russell, 07876616163
     
  5. Newfie

    Newfie Funster

    Joined:
    Jul 5, 2016
    Messages:
    71
    Likes Received:
    38
    Location:
    Essex
    thanks for the information I am in Essex so a little out of my area. But will keep in mind if we are in the location
     
    • Like Like x 1
  6. Deneb

    Deneb Funster

    Joined:
    Oct 20, 2015
    Messages:
    48
    Likes Received:
    31
    Location:
    Herts
    Retainagroup glass etching on the cab windows, or the component blast etching are what I'd recommend. Don't bother with the plastic windows. In my experience thieves are very adept at either altering the characters by adding extra dots or polishing the whole etching off of plastic windows.
     
    • Thanks Thanks x 2
Loading...

Share This Page