Jacflash
Free Member
Hi all,
My Ducato 2.0 JTD 11 (2003) has failed it's MOT with "slight play" in one front bearing, I've seen posts on here asking about bearing torque settings etc.. but now answer as to taper bearing or not.
If this is a taper bearing can I simply use a 41mm socket and give it a "tweek" or is it a replacement?
There's no noise or rumble from the bearing just a bit of slack (sleeved nut [knock to lock] not castle and pin)
Any help appreciated
John
My Ducato 2.0 JTD 11 (2003) has failed it's MOT with "slight play" in one front bearing, I've seen posts on here asking about bearing torque settings etc.. but now answer as to taper bearing or not.
If this is a taper bearing can I simply use a 41mm socket and give it a "tweek" or is it a replacement?
There's no noise or rumble from the bearing just a bit of slack (sleeved nut [knock to lock] not castle and pin)
Any help appreciated
John