benimar 294 (1 Viewer)

[trevor yates]

does anyone know how to stop overhead bed rattling when travelling

 

[MR. FUSION]

Remove Ian and his new GF ?

 

[Vanderek]

I read in the Chausson section last week that you can adjust the two front springs with a spanner - drop the bed half way - stand at the front and you can just see the nuts where it connects to the tracks.... so i did this on Friday with my Benimar - and yes no squeaking ..ps check for loose screws in the front vertical tracks - if protruding will catch the bed on its way down.

 

[gus-lopez]

 

[Howard H]

And congratulations on owning a quality van like the 294

^{_{Subscribers  do not see these advertisements}}

 

[trevor yates]

the knew benimars dont have the springs on the beds

 

[Vanderek]

There are two points (in the Benimar 202) at which the bed is attached to the vertical tracks - these two have a thread and nut inside the bed frame and there is also a spring to tension this - by adjusting the tension you can reduce the rattle when travelling

 

[trevor yates]

thanks but the 294 does not have any springs??? it is done by gas struts.