Alde 3000

Discussion in 'Heating and Air-Conditioning' started by Spencer22, Feb 22, 2013.

  1. Spencer22

    Spencer22 Read Only Funster

    Joined:
    Feb 9, 2013
    Messages:
    1
    Likes Received:
    0
    Location:
    Bromsgrove
    Hi does anybody have advice on fitting a Danfoss TP5000 to a Alde 3000 heating system on a Burstner A747-2 have been told that alde recommend these units which are programmable but I'm not sure where to wire to ie the boiler or existing thermostate
     
  2. scotjimland

    scotjimland Funster Life Member

    Joined:
    Jul 25, 2007
    Messages:
    28,934
    Likes Received:
    25,574
    Location:
    .
    Hi and welcome..

    as the Danfoss is a 5 day programmable room thermostat, it would be installed in place of the your existing room thermostat.

    if you have not already seen it, Danfoss info here
    http://heating.danfoss.co.uk/xxTypex/296432_MNU17433300_SIT313.html
     
  3. maz

    maz Funster

    Joined:
    Jan 26, 2011
    Messages:
    2,516
    Likes Received:
    2,157
    Location:
    Out there somewhere
    Hi and welcome to the Fun. :welcome:

    I don't know about the actual wiring but I had the same programmer fitted to the same Alde boiler by Graham Cutmore (UK Number 1 Alde man). The thermostat on the Alde control panel had to be turned to maximum and then the Danfoss programmer would override it. Hope this helps. :Smile:
     
    • Like Like x 1
  4. canopus

    canopus Funster Life Member

    Joined:
    Nov 27, 2010
    Messages:
    2,827
    Likes Received:
    3,205
    Location:
    Lincolnshire
    Maz who is Graham Cutmore when he's washed and ready for bed?
     
  5. Dai

    Dai Read Only Funster

    Joined:
    May 14, 2008
    Messages:
    47
    Likes Received:
    23
    Location:
    West Wales
    I have an upgrade planned this year wherebye I am going to have my "on" "off" heating controller on my van changed to what they are fitting on later Burstner vans. Namely the "bells and whistles" digital controller. This will enable me to programme when the heating comes on and off when the van is laid up.

    Graham Cutmore comes highly recommended. He is not aware of my custom yet

    Link: http://www.grahamcutmoreengineering.co.uk/#/alde-slimline-boiler-2927/4513356699

    Dai
     
  6. maz

    maz Funster

    Joined:
    Jan 26, 2011
    Messages:
    2,516
    Likes Received:
    2,157
    Location:
    Out there somewhere
    Dai has provided a link below. Graham Cutmore is based in Wellingborough but does travel. He knows everything there is to know about Alde boilers and then some. He's also a very nice man. :Smile:
     
  7. canopus

    canopus Funster Life Member

    Joined:
    Nov 27, 2010
    Messages:
    2,827
    Likes Received:
    3,205
    Location:
    Lincolnshire
    Cheers Maz he might just the chap Im looking for to carry out a service on our boiler:thumb:
     
Loading...

Share This Page