Terry's Self Build Relay (1 Viewer)

[Terry]

Update -Nothing has been touched since the last update I have been promised the doors on last Monday, Wednesday and Thursday/Friday but still have not got them -I managed to source some grey carpet to change from the blue but not even got motivated to even pull the blue off so nothing has been done but we have got lots done on Paul's van in the 3 days we have worked on it see Paul's boxer thread http://www.motorhomefun.co.uk/forum/threads/pauls-self-build-boxer.111023/#post-1463670
terry

 

[Terry]

I have doors Picked them up friday night but worked on Paul's boxer all day Saturday and a couple of hours today -But then we did 4 hours on the relay and got some cover trims done finished sealing the loo/shower -Paul wired up my outside light and then we cracked on and hung all the doors and drawer fronts only leaving 5 handles and catches on the upper cupboards for me to finish on Monday/tues/weds if I find time All in all perfectly usable so I can start and put some stuff into cupboards etc once the catches are on --Got to get a microwave and fit it in then Paul has got to make one of the 12v sockets permanently live for me to charge phone etc -at the moment they only come on with ignition -Now got to see if O'leary's have the waste water tanks in yet if not I am thinking of putting a simple 5 gallon tank /drum on each side of the van for sink and shower waste -means either coupling them together or two empting taps
Redone the foam in the rear cushions from High density to reflex foam -it's a little softer to lay on -Trouble is now my garage is getting full of foam cushions
terry

 

[Wildge]

Can't wait to see it Terry but gawd knows when we will get to another meet .....
Well done anyway

^{_{Subscribers  do not see these advertisements}}

 

[Terry]

It looks all finished but I am going to box in under both driver and passenger seats and I cannot make my mind up as to box in the slide bed bit -Think I will do it and see if I like it If not I'll think of something else after all I have done most of the van twice so why stop at a little boxing in
terry

 

[cruiser]

going to look great. but will you keep it.

 

[Terry]

Of course I will keep it until someone buys it
Terry

^{_{Subscribers  do not see these advertisements}}

 

[Terry]

Update -Tuesday I spent about 5 hrs on the van and got all the upper locker handles /catches on,then boxed in the pull across bed frame in I need to point out that I used a hand screwdriver and not a battery drill on the catches/stays etc 8 x 6 in total It was pointed out to me last night by Paul that I have a small Bosch drill on my kitchen W.Top for just such occasions Daft thing is I move it almost daily
Anyway another first this morning I have wired (yes me)up a light or should that be 3? No doubt Paul will laugh bit you turn each light on and off and they all work (nothing to this wiring lark)simply connect wires to wires and it's done Paul tells me it's the knowing which wires go together so on that bit of info I will go back to leaving wires to him -After this coffee break I am going to start clearing out the van ready to pack for H/Pool
terry

 

[Cat53]

The wood looks great. Smart move to change it.

 

[cruiser]

oh dear. what a master peace .looking great. well done that man.

^{_{Subscribers  do not see these advertisements}}

 

[movan]

Looking lovely, Terry.. Agree with Cat that you made the right decision re the wood and worth waiting for...

 

[Ralph-n-Bev]

Terry the van looks great. Those doors look much better.
We shall see you , and your van at haggars bring and buy. Ralph's got lots if bits n bobs to sell.

 

[Peter & Elaine]

Terry the van looks great. Those doors look much better.
We shall see you , and your van at haggars bring and buy. Ralph's got lots if bits n bobs to sell.

What ya selling ?
Please

^{_{Subscribers  do not see these advertisements}}

 

[Terry]

What ya selling ?
Please

oye wait your turn

 

[Baycott]

Another great thread
Hopefully will get to a meet sometime and see yours @Terry and @Ralph-n-Bev

 

[Kool Kroozer]

Looks very good Tezz you should do it for a living mate

^{_{Subscribers  do not see these advertisements}}

 

[Steve]

All most time to be thinking about the next one Terry

 

[irnbru]

Looks life a fab job. Look forward to seeing it shortly

 

[Peter & Elaine]

oye wait your turn

Sod off or I will Nick your bread knife

^{_{Subscribers  do not see these advertisements}}

 

[cruiser]

watch out@Peter@Elaine, Terry might set Max on you.

 

[Peter & Elaine]

watch out@Peter@Elaine, Terry might set Max on you.

Have you seen Elaine bite

 

[cruiser]

sorry no. but I have seen Maxs teeth

^{_{Subscribers  do not see these advertisements}}

 

[Terry]

Sod off or I will Nick your bread knife

That was/is top quality elcipse BK (Sheffield steel) none of your Chinese rubbish
terry

 

[Terry]

Just thought it time to give a update -nothings been done as such -still got to box in front seat bases and fit a shower curtain and microwave
Now it's ready for GRAPHICS
anyone seen any that took your eye ?
here's some pics of it plain if you have any suggestions as to what will+look good please forward pics/links etc

 

[cruiser]

still looking good.

^{_{Subscribers  do not see these advertisements}}

 

[Puddleduck]

Fun logos of course!

 

[scousebird]

We saw a PVC in Epernay that had a huge sunflower on the back.

 

[Langtoftlad]

Park up anywhere...

Broken Link Removed

...the ultimate stealth van .

^{_{Subscribers  do not see these advertisements}}

 

[Terry]

Just keep ideas coming not seen any that take my fancy
terry

 

[Puddleduck]

Could you get them custom made?

 

[Paddywack]

Why not get it hand painted?

^{_{Subscribers  do not see these advertisements}}