Removal of fixed table (1 Viewer)

[Phillip SeamN]

does anyone know how to remove a fixed table in a Burster Aviano impulse. There are 4 screws into the floor but after removing them, the table still doesn't move only turn.

Thanks

 

[mike mcglynn]

Its the same on my van but brute force sorted that ,put some wd40 onto the base and work it round slowly, draw a pencil line then you can see if its lifting when you apply some muscle

 

[Phillip SeamN]

Thanks. Was there a hole left in the floor or just the screw holes. I wondered in the stand was bolted into the floor from underneath

 

[ambulancekidd]

 

[maz]

We had the same problem and ended up using a large chisel on it! See this thread:
https://www.motorhomefun.co.uk/forum/threads/removing-table-from-a-bürstner.182499/

Once removed, there were just four small screw holes left in the floor.

^{_{Subscribers  do not see these advertisements}}