Destination Unknown
Free Member
- Oct 30, 2010
- 398
- 835
- Funster No
- 14,286
- MH
- American A Class
- Exp
- Not Long Enough...!!
When we replaced the roof membrane we put the sat dish up front, But not thinking at time it could get obstructive by the WineGard Arial. So going to put it back in centre of Rv.
Could not move fitting plate as bonded to roof, and def not paying 120 squid plus for a new plate, got a ally plate from our Stainless Friend and got some stainless bolts, nuts ect. So cost about 7 squid so well happy.
But it had a fault code saying something stopping it, took it to bits and checked motors, gears ect and got it working again.
What this post is all about.
Looks like the dish has not been tight enough and the knurled spacers have worn into the dish up bracket. So to rectify this, Do you think a couple of Star Washers on the ends between knurled spacer and bracket would dig in and work ?
Could not move fitting plate as bonded to roof, and def not paying 120 squid plus for a new plate, got a ally plate from our Stainless Friend and got some stainless bolts, nuts ect. So cost about 7 squid so well happy.
But it had a fault code saying something stopping it, took it to bits and checked motors, gears ect and got it working again.
What this post is all about.
Looks like the dish has not been tight enough and the knurled spacers have worn into the dish up bracket. So to rectify this, Do you think a couple of Star Washers on the ends between knurled spacer and bracket would dig in and work ?