Fly screen door (1 Viewer)

[Propshaft]

Hi does anyone know were I could get a new vertical concertina fly screen door made for my 524
Thanks

 

[StitchesnFluff]

Try brown hills

 

[Propshaft]

Tried them

^{_{Subscribers  do not see these advertisements}}

 

[Propshaft]

Hi I have since my initial post took the screen out and recorded it not a pleasant job the trouble is some of the plastic/ nylon guides are really worn and no idea we’re to get replacements from would like to know we’re to get the pleated screen from
Cheers please let me now how you get on with it

 

[Wagoneer]

Suggest you google "Horrex flysceen habitation door" - might be the supplier Hymer use ?

Doubt you'd be able to purchase individual parts for repair of existing screen.

 

[Propshaft]

Don't think it's Horrex I am pretty sure it's a Reimo screen I have emailed them twice but get no reply

^{_{Subscribers  do not see these advertisements}}

 

[bigalw35]

I’ve got the Hymer b680 and our habitation door fly screen is also held in by a rubber bead, exactly the same rubber bead as the glass in our greenhouse rests on, our green house is a Hall’s crittal, hope this helps, you could probably get som from them

 

[bigalw35]

If you need the actual mesh, you could buy one of the house door mesh fly screens, you can get them now for about a tenner

 

[bigalw35]

Beware with the hose there’s a lot of pressure from the powered steering pump

^{_{Subscribers  do not see these advertisements}}

 

[Propshaft]

Wish it was that easy I have tried almost everything this is a factory fitted item it sits back from the frame on a integrated ally spacer frame Brownhills couldn't come up with anything anyway restrung it again so will probably last a couple of years

 

[bigalw35]

a few pictures might help us

 

[Wagoneer]

The 3 main manufacturers of hab door pleated flyscreens (afaik) are Horrex, Remis & Hartal. Think Reimo only do screens for panel van conversions.

The flyscreens supplied by Horrex are 650mm wide x 1750 or 1850mm tall.

The flyscreens supplied by Remis (REMICare ll) are 650mm wide x 1800 or 2000mm tall.

Since the OP's flyscreen is "original Hymer equipment" it's possible Hymer purchased the flyscreen from any of the above manufacturers BUT to their own specification.

Perhaps an email to Hymer in Germany might help resolve the issue.

^{_{Subscribers  do not see these advertisements}}

 

[Propshaft]

Thanks I may very well try and get hold of Hymer well worth a try and thanks for the other info

 

[bigalw35]

a few pictures might help us

the only piccy of the door/fly screen I can find at the moment, the fly screen is obviously folded back at the moment