Fiat alloy spare wheel carrier

[The Freeminer]

Does anyone know the part number for the kit that allows an alloy wheel to fit to the spare wheel carrier on a fiat based MH? Or where I can get one?
I understand that it comprises a plate, some screws and an Allen key.
Thanks

 

[Carolyn and Kev]

Depends on the type or if its a simple set up you want?

Ebay Fiat Ducato spare wheel carrier. http://rover.ebay.com/rover/1/710-5...0001&campid=5338547443&icep_item=283133058731

Or you could make one using a bit of aluminium plate and some hardware.

Kev

 

[The Freeminer]

Kev, thanks, I have the lifter kit, but it will only lift a steel wheel. I have seen a kit that will allow my lifter to lift a pan alloy, but not in enough detail to be able to make one. So am trying to identify the kit so I can buy or see enough detail to make one. Thanks again.

 

[bobandjanie]

Fiat Ducato Alloy Wheels

So yesterday zac posted a thread about different bolts for alloy and steel wheels on a ducato and I put a photo of something that was in my Jack tool kit box provided with our 2017 fiat ducato with 16" alloy wheels, ? anyway no one knew what it was ? and it caused me a sleepless night and has...

www.motorhomefun.co.uk

I put this thread on here, don't know if it helps. ? Bob.

Looks like this is the part number.

 

[The Freeminer]

Bob, thank you that is what I am after... Now to find one somewhere..

^{_{Subscribers  do not see these advertisements}}

 

[Carolyn and Kev]

Looking at what you are now considering....You have an A class yes? Garage? D links and a storage strap ! No??

kev

 

[The Freeminer]

A Class yes, garage no, we are only 6 meters.

 

[Spanner]

I think you will find there are two “adapters” available depending on the wheel diameter fitted to your van, 15 or 16 inch

 

[The Freeminer]

Not sure if the diameter 15/16 inch is important or the PCD, I have found a source and will ring them tomorrow with all my size details.
Thanks for the info

 

[IRHP]

Not sure if the diameter 15/16 inch is important or the PCD, I have found a source and will ring them tomorrow with all my size details.
Thanks for the info

The pcd is very important, it’s the measurement and spacing of the holes in the wheel. It has to match the stud spacing and number of them. I think the standard fiat is 5x118 but the tyre diameter can be 15 or 16

^{_{Subscribers  do not see these advertisements}}

 

[The Freeminer]

IRHP, you are correct the pcd is critical. Have now received kit and spare alloy wheel fitted under van.