Anybody know who makes this tap and how to get the swan neck off.
It's from a 2017 Bailey Autograph 68-2.
It's from a 2017 Bailey Autograph 68-2.
Can you identify the make of this tap
- Thread starter The Artilleryman
- Start date
Maybe this one
theleisurewarehouse.co.uk
Reich Trend S High Caravan Tap
Reich Trend S High Tap 33mm Widely used on caravans and motorhomes often in bathrooms Elegant and modern mixer tap with a classic curved brass 360° swivelling spout, brass lever, and lightweight plastic body parts making it ideal for caravans and motorhomes. Ceramic cartridge and microswitch...
theleisurewarehouse.co.uk
OP
OP
That's it. Just need to remove the collar retaining the swan neck.
Dandm
LIFE MEMBER
Grub screw out of sight?
Rollingwheels
LIFE MEMBER
The top collar probably unscrews by hand and a grub screw underneath
Subscribers do not see these advertisements
I'm guessing that you start with removing the end plate of the handle and undoing whatever you find in there (Reich very fond of torx screws apparently). Then progress to removing the spout etc . . .
Tombola
LIFE MEMBER
this /\
is this it below
OP
OP
Thank You, this will help me sort out the tap after I forgot to leave it open during the winter temp. down to -5 c and swan neck pushed up, but not out.
Same happened to ours. Had to buy a new one at £93 (ouch) as we couldn't fix it.
Sonja
OP
OP
About to check mine.
Subscribers do not see these advertisements
OP
OP
Lucky escape, just taken off the top cap - some signs of radial cracking - refitted the O rings correctly in there groves.
One very minor drip from operating leaver, but this can wait till we get back.
Join us or log in to post a reply.
To join in you must be a member of MotorhomeFun
Join MotorhomeFun
Join us, it quick and easy!
Log in
Already a member? Log in here.