Burstner Lyseo 2019 Radio fuse. (1 Viewer)

[Stealaway]

I need to reset the Fiat Motorhome / Pioneer radio/sat nav back to first startup. I'm going to try turning off the power overnight and see if that promotes a clean restart - if I can isolate the bloody thing without taking it out of the dash or disconnecting the hab battery. I think the electroblok is EBL 119 .

The Satnav has been set up in German at start up and I can't find any way to reset it. The radio bit can be reset to English but not the sodding SatNav.

Any ideas folks?

 

[tonyidle]

Press the Reset button. Or does this help?

 

[Stealaway]

Press the Reset button. Or does this help?

Yep done that -- it will reset everything except the Satnav. Thanks anyway.

I can't find any reset button mentioned anywhere.

^{_{Subscribers  do not see these advertisements}}

 

[tonyidle]

Yep done that -- it will reset everything except the Satnav. Thanks anyway.

I can't find any reset button mentioned anywhere.

Is there not a Factory Settings item hidden somewhere in the satnav menu system?

 

[Stealaway]

There isn't any factory reset that I can find. The manual tells you how to change the language to the original set up language (in this case German) but nothing else.
My only hope is that it will reset if I can disconnect from it's power supply.

 

[Vanderek]

There isn't any factory reset that I can find. The manual tells you how to change the language to the original set up language (in this case German) but nothing else.
My only hope is that it will reset if I can disconnect from it's power supply.

Stealaway I have just been out and checked mine ( Burstner 2019 ) - managed to change the sat nav language to French and then back to English in about three or four presses...

Turn sat nav on
press the three bars at bottom right of screen
on the menu that appears select right until you get the settings icon ( cogs )
select "regional" settings
go to language "Sprache "- scroll up and down you can select menu language and you can also select voice language
once you select press the green bar at bottom middle of display to confirm
it will the restart

Dale

^{_{Subscribers  do not see these advertisements}}

 

[Stealaway]

You're a star, I'll go and have look now

 

[Stealaway]

Stealaway I have just been out and checked mine ( Burstner 2019 ) - managed to change the sat nav language to French and then back to English in about three or four presses...

Turn sat nav on
press the three bars at bottom right of screen
on the menu that appears select right until you get the settings icon ( cogs )
select "regional" settings
go to language "Sprache "- scroll up and down you can select menu language and you can also select voice language
once you select press the green bar at bottom middle of display to confirm
it will the restart

Dale

That's done it --- Perfect -- Thanks again