Auto Trial Frontier Mohawk Brakes 2011 (1 Viewer)

[tomdsew]

Hi Everyone

I have the Auto Trial Frontier Mohawk Brakes 2011 130 multijet
all the brakes are in need of change
does anyone know the part numbers for the discs and pads front and rear
The only info i can give is the fronts are 300mm vented and the rears are 280mm solid
any help much appreciated
take care tom

 

[donkey]

Try putting your reg number into a web site such as Europarts, it should identify the correct parts for your vehicle.
Geoff

 

[camoyboy]

Try these:

NEW EBC FRONT AND REAR BRAKE DISCS AND PADS KIT OE QUALITY REPLACE - PD40K625 | eBay

EBC Automotive brake rotors are made from G3000 spec cast iron. Every EBC rotor is runout inspected. Be aware that your Model of Vehicle may have a choice of 2 / 3 different Discs And Pads Kit Options.

www.ebay.co.uk

^{_{Subscribers  do not see these advertisements}}

 

[CamperManLez]

Go on the BREMBO website. Look up the options for your vehicle and download the drawing for comparison with the part. Be careful as there are several options. From your basic dims it looks like you have the heavy chassis vehicle. Those basic dims are the same as mine (I have a SEVEL Boxer heavy chassis, DIY all the discs and pads last year) but you need to do more measuring.
Check disc thickness, centre hub diameter, Bolt circle, offset etc, its not difficult but the Brembo drawings have it all.
Its important you have the right disc as the calliper is matched.
Good luck

 

[CamperManLez]

And buy from a local Europarts or GSF or SAS, if they turn out wrong its easy to take them back. I used Europarts and matched the BREMBO part number to the disc spec description.

 

[CamperManLez]

In fact try this, you click on the online catalogue in the home page
<Broken link removed>

^{_{Subscribers  do not see these advertisements}}

 

[MitchandJenny]

Just ring a local motor factors and give them your details. Or ask Autotrail.
Mitch