IMG_3011.jpeg

For sale Scuttle Drain Pipe Kits for Ducato

£25.00

Details

Fit Ducato Scuttle drains are notoriously inadequate with their drains. They are far too small and get clogged far too frequently . SO. This is my PETG 3D printed windscreen scuttle drainage kit for Fiat Ducato X250 vans 2006-2014. Drainage holes are increased to 8mm and 6mm with an extra hole in the central left area. The kit includes instruction sheet, hole template and hosing to direct the water from harms way. Tools required will be 4mm, 12mm and 15mm drills and an Alan key. Fitting will involve removal of the small panels above the headlights and the RH headlight. All pretty straight forward to remove.
They are £25 with free postage for funsters.
Please PM me of email chrisatheathpark@yahoo.com

IMG_3011.jpegIMG_3006.jpegIMG_2994.jpegIMG_4965.jpegIMG_4048.jpegIMG_4049.jpeg

More from PaulandChrissy

PaulandChrissy (+31 /0 /-0)
Updated
Expires
Views
362
Likes collected
4
TV Remote Holders These are my designs and 3D printed Remote Holders to keep them safe and easy to hand. All printed in an attractive Sparkled Black PLA filament. They can be attached to your motor home wall with double sided 3M tape, but if you prefer to screw them to the wall with counter sunk...
£9.00 to £12.00
2 watching
PaulandChrissy (+31 /0 /-0)
Updated
Expires
Views
287
Likes collected
1
Whale electrical water pump socket cover replacement. The originals are extremely flimsy and fall off in double quick time. I have made a much more robust version in flexible TPU95a. It also has a little finger nail ridge to make it easier to remove and fit. TO FIT. Just unscrew your socket to...
£5.00
PaulandChrissy (+31 /0 /-0)
Updated
Expires
Views
322
Remis 10057562 Sun Visor Spacers. 3D printed Alternative for Fiat Ducato that have Remis blinds fitted, and have problems folding their visors fully forward and to the side. These 3D printed spacers come complete with stainless steel bolts as the originals are too short. They allow your visors...
£25.00
1 watching
PaulandChrissy (+31 /0 /-0)
Updated
Expires
Views
209
Status TV antennas on the roof of your van suffer from water leaks seeping in through the rubber gland at the base of the extendable pole. This is largely due to its constant exposure to the elements and the sun. The rubber glad hardens and eventually allows water to seep through. This is...
£20.00
PaulandChrissy (+31 /0 /-0)
Updated
Expires
Views
608
Fiat Ducato X250 Motorhome Engine Bay Water Deflector to deal with the water leak at the centre joint of the scuttle plates. Designed and 3D printed solution to prevent water leaking onto your engine and injectors. Fits Ducato X250, Peugeot Boxer and Citroen Relay 2006-2014ish. Please look at...
£12.00 to £15.00
2 watching

More in Motorhome Accessories

TUCANO (+0 /0 /-0)
Expires
Views
23
White winter covers, brand new. Dimensions 402 x 223 mm. £30 each, postage included.
£30.00
TUCANO (+0 /0 /-0)
Updated
Expires
Views
119
Thetford 4000 series cassette, not used since new float switch fitted at £26 cost. Buyer to collect please.
£76.00
2 watching
GoldenVision (+0 /0 /-0)
Expires
Views
28
B2B - Battery to Battery Charger
£90.00
For sale Step support
Jev88 (+0 /0 /-0)
Updated
Expires
Views
223
Bolts to your lower step and clips up out the way. Unclip, leg swings down and unscrews a long way to get the height you want.
£15.00
GoldenVision (+0 /0 /-0)
Expires
Views
28
Trickle Solar Charger for Vehicle Battery This will keep your vehicle battery topped up. It will plug into a cigarette socket (if that is “live” when the engine is off), the OBD port or direct to the battery. All fittings are supplied. The output is rated 4.8w - enough to maintain the...
£35.00
Rhino Installs
“AS
“Funster
“Falcon
Select,

Classified ad information

Posted by
PaulandChrissy
Feedback score
+31 /0 /-0
Category
Motorhome Accessories
Views
642
Last update
Expires
Back
Top