Veltrim wall covering

Discussion in 'Motorhome Chat' started by Bruce, Nov 26, 2012.

  1. Bruce

    Bruce Read Only Funster

    Joined:
    Aug 12, 2012
    Messages:
    140
    Likes Received:
    50
    Location:
    Glasgow
    Hi I will be using a veltrim wall type of covering on my minibus conversion.Can anyone tell me how forgiving this is regarding covering roundhead self tapping screws etc.I have one or two slightly raised heads on screws and was hoping to get away with veltrim All advice appreciated.
    ,,,,,,,,,,,,,,,,,,Bruce
     
  2. TheBig1

    TheBig1 Funster Life Member

    Joined:
    Nov 27, 2011
    Messages:
    7,224
    Likes Received:
    9,608
    Location:
    Dorset
    get them as flush as possible or it comes unstuck in a circle round the screw. if fairly flush, this hardly shows. otherwis it would be better to make them obvious with screw caps so they blend in rather than hilight a defect
     
    Last edited: Nov 26, 2012
    • Like Like x 2
  3. Bruce

    Bruce Read Only Funster

    Joined:
    Aug 12, 2012
    Messages:
    140
    Likes Received:
    50
    Location:
    Glasgow
    veltrim

    Thanks for advice . Might be able to countersink most of them but advice heeded...................Bruce
     
Loading...

Share This Page