rollerteam 700 habitation door handle (1 Viewer)

graham chesters

Free Member
Oct 29, 2014
2
0
dundee
Funster No
34,035
MH
van conversion
Exp
since 2013
The outside door handle snapped off. I have bought the replacement , however when I try to dismantle the handle to replace it it will not separate . I and afraid to force it. Any advice please
 

DanielFord

Free Member
Jun 1, 2013
3,020
3,086
Funster No
26,287
I don't know the specific model, however, after first checking that you really have removed all the fixing screws/bolts I would use a mobile phone case splitter to break the sealant around the handle.
An old credit card can also be used. If it will not budge, I would suggest you have missed a bolt somewhere.
Sorry to be a bit vague, but hope this helps a little.
 
Upvote 0
OP
OP
graham chesters

graham chesters

Free Member
Oct 29, 2014
2
0
dundee
Funster No
34,035
MH
van conversion
Exp
since 2013
Thanks for the reply . I have taken out all the scews and the lock/handle hangs loose but still connected on Botha sides of door. I was thinking maybe a pin in the mechanism or something. Any further thoughts. Cheers G

Subscribers  do not see these advertisements

 
Upvote 0

DanielFord

Free Member
Jun 1, 2013
3,020
3,086
Funster No
26,287
If it is like a car door handle, there will be a cir-clip holding the activating rod in place. I suspect you will not have cir-clip pliers to open them, so you will have to be creative with removing them.
 
Upvote 0

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top