rapido 9m series tyre pressure

Discussion in 'Motorhome Chat' started by JohnM, Dec 3, 2011.

  1. JohnM

    JohnM Read Only Funster

    Joined:
    Nov 8, 2008
    Messages:
    651
    Likes Received:
    179
    Location:
    Central Scotland
    Would any funsters with rapido 9m series m/h with 16' tyres tell me correct pressures.:Smile:
    Thanks.:Wink:
     
  2. JohnM

    JohnM Read Only Funster

    Joined:
    Nov 8, 2008
    Messages:
    651
    Likes Received:
    179
    Location:
    Central Scotland
    bump
     
  3. Reallyretired

    Reallyretired Funster

    Joined:
    Apr 27, 2008
    Messages:
    5,701
    Likes Received:
    3,207
    Location:
    Eastbourne East Sussex
    According to the sticker on mine (on the passenger seat base but covered by the carpet trim, which is held by velcro) Front 55 rear 65 psi
     
    • Like Like x 1
  4. Bailey58

    Bailey58 Funster Life Member

    Joined:
    Jun 23, 2010
    Messages:
    6,342
    Likes Received:
    9,602
    Location:
    Norfolk and Toftir.
    The safest option is to take the vehicle to a weighbridge and get the weight on each axle, email the manufacturer's technical department with the make and size of the tyres together with the load on each axle. Then play about a little with their recommendations to give you the best ride.

    Continental gave me 78psi on the rear and 52psi on the front for my weights and i usually have 70/60 (depending on how well the wife's diet is going at the time). I've also got air suspension which helps smooth the ride on our shoddy roads.

    PS The weighbridge has extra benefits in telling you how near the maximum load limit you are.
     
    Last edited: Dec 3, 2011
Loading...

Share This Page