Terry
LIFE MEMBER
Hi Sandra stick some gaffer tape over it temporally
terry
terry
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Subscribers do not see these advertisements
They generally don't even bend a sheet at the edges simply screw it together add sealant and the capping strip-that performs the twin task of sealing and looking prettyI always wonder that if when they made a body they do not make roof that is bigger than the body with an overhang at the edge so that it covers the body and the top of the side, a bit like the top of a plastic container does then if it was sealed as well would never leak without an actual breakage occurring. Cost too much I suppose to mould a roof rather than stick a bent sheet over and stick it at the edges.
I always wonder that if when they made a body they do not make roof that is bigger than the body with an overhang at the edge so that it covers the body and the top of the side
Subscribers do not see these advertisements
They can..................my van is 24 years old, 0ne-piece fibreglass top even extends over the original truck cab roof.....
View attachment 58185
and the frame is steel not wood
the walls the inside will be like any other vanWhat do you screw stuff to?
What do you screw stuff to?
Not a lot of thought goes into a lot of vans -the floor is added then sides sat onto floor without being stepped down on the outside on some then roof sat on top of sides -again not bent over -so If a seal lets go it gets inside
Swift had a big problem back in 2005/6 in that the sides were sat onto the bottom that was supposed to be weather treated then they did not seal the side skirts enabling water to run down the sides and onto the floor that acted like a sponge Must have cost them thousands and lots of bad publicity that the then Chairman did a good job of containing
terry
Subscribers do not see these advertisements
They can..................my van is 24 years old, 0ne-piece fibreglass top even extends over the original truck cab roof.....
View attachment 58185
and the frame is steel not wood