Scallywag
Free Member
About to fit Fiamma F65S 400 to my Rapido V66 van conversion. Fitting kit instructions on use of Sika 252 sealant are vague i.e. just a picture that seems to show the brackets sitting slightly proud on a cushion of sealant.
So question is - do I put the beads of sealant on the brackets then seat them gently, wait 24 hours for cure, then screw fittings down firmly - perhaps giving me a silicon cushion between brackets and van? Or do I apply sealant and screw fittings down tight straight away, ensuring firm metal to metal contact?
Any input welcome.
So question is - do I put the beads of sealant on the brackets then seat them gently, wait 24 hours for cure, then screw fittings down firmly - perhaps giving me a silicon cushion between brackets and van? Or do I apply sealant and screw fittings down tight straight away, ensuring firm metal to metal contact?
Any input welcome.