Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Subscribers do not see these advertisements
Beyandh may I ask is this the kind of panel you have, please?
Subscribers do not see these advertisements
Here is promised picture of our solar panel controller.
At present top two green lights on left are on, the first is constant (Sun) the other blinking slowly (Bat).
On extreme right, square LED is constant RED, this is the ON/OFF display light under which is push button for ON/OFF function and when pushed, Red light goes off but others remain as described. Guessing that RED light on, means panel is off as we are at present on EHU.
If that is the case then controller switches off automatically when we connect to EHU, I never touched it ......... promise !
All electrics working OK, and batteries charging, but they would as we are hooked up
Puzzling.
Regards Bryan
http://www.victronenergy.com/manuals-per-product/?productid=202
Is it a Victron energy BlueSolar?
Depending on the model the link above may assist.
:thumb::thumb:
3. LED INDICATORS
Green LED is ON when solar is charging the battery.
In case of system over voltage the green LED blinks
.
Green LED is ON when the battery voltage is in the
right range.
Green LED is slowly flashing when the battery is fu
lly charged.
Yellow LED is ON when the battery voltage is low.
Red LED is ON when the load is cut off.
In case of overload the red LED is slowly flashing
(The load current is 1.25 times of rated current fo
r 60 seconds, or
the load current is 1.5 times of rated current for
5 seconds)
Red LED is fast flashing in case of short-circuits.
Red LED is ON when the push button is ON.
Red LED is OFF when the push button is OFF