double bed Avantgarde 100

Discussion in 'The Beginner' started by macski, Apr 28, 2010.

  1. macski

    macski Read Only Funster

    Joined:
    Nov 29, 2008
    Messages:
    10
    Likes Received:
    1
    Location:
    Enfield
    Hi every one
    How do I make up the double bed in an 2002 avantgarde 100. I have pulled out the two extensions from the dinette seats and pulled the slats out which only go to the end of the seats can any one tell me what goes between the extensions I seem to be a bit missing . I have all the cushions for the bed.
    Sorry this is a bit long winded any help or advise as to what I should be looking for would be gratefully received.
    macski
     
  2. Geo

    Geo Trader - Funster

    Joined:
    Jul 29, 2007
    Messages:
    9,498
    Likes Received:
    5,552
    Location:
    Mansfield,Notts
    Usually the table is used if not your a bit of ply short:Doh:
     
  3. GJH

    GJH Funster Life Member

    Joined:
    Aug 20, 2007
    Messages:
    27,227
    Likes Received:
    34,391
    Location:
    Acklam, Teesside, originally Glossop
    You should have a piece of board which goes between the two extensions. See photos - first shows it with the extra cushions. Second shows it in place.

    Graham
     

    Attached Files:

  4. macski

    macski Read Only Funster

    Joined:
    Nov 29, 2008
    Messages:
    10
    Likes Received:
    1
    Location:
    Enfield
    thanks

    worked it out but have bits missing

    macski
     
  5. macski

    macski Read Only Funster

    Joined:
    Nov 29, 2008
    Messages:
    10
    Likes Received:
    1
    Location:
    Enfield
    Hi all

    can anyone tell me what the purpose of the hinged back rest of the dinette seat is for

    at the drivers end

    thanks

    macski
     
  6. GJH

    GJH Funster Life Member

    Joined:
    Aug 20, 2007
    Messages:
    27,227
    Likes Received:
    34,391
    Location:
    Acklam, Teesside, originally Glossop
    It's because it supports the backrest from the rear dinette seat when the bed is made up. That cushion is wedge shaped so the hinged piece levels it out.

    I think I've a diagram somewhere on the main PC but it isn't on this netbook. I'll look for it and post it when we get back later this week

    Graham
     
  7. GJH

    GJH Funster Life Member

    Joined:
    Aug 20, 2007
    Messages:
    27,227
    Likes Received:
    34,391
    Location:
    Acklam, Teesside, originally Glossop
    Here is the diagram.

    A is the backrest cushion from the forward facing dinette seat.
    B is the seat cushion from the forward facing dinette seat.
    C is the seat cushion from the rearward facing dinette seat.
    D & E are the two extra cushions.

    Graham
     

    Attached Files:

    • bed.jpg
      bed.jpg
      File size:
      15 KB
      Views:
      6
Loading...
Similar Threads
  1. Alan-2016
    Replies:
    1
    Views:
    209
  2. Gillus
    Replies:
    43
    Views:
    2,319
  3. SwissBob
    Replies:
    7
    Views:
    562
  4. Angelite73
    Replies:
    10
    Views:
    699
  5. Diane1969
    Replies:
    7
    Views:
    914

Share This Page