Don't know
Free Member
Hi just looking for advice, when I plugged a phone charger in it blew the charger, I looked at the wires , at the back and noticed the brown wire had been folded , and there was bare wire on the brown wire, so wrapped in insulation tape, also the previous owner had connected maxiview. Via plastic connectors, so I disconnected the maxiview wire. So it is just the 2 original 12 volt wires going to the socket, brown going to the positive symbol, blue going to the negative symbol on the rear on the 12 volt socket. Then tried another phone charger this time, saw a bit of a flash and another phone charger blown. Any ideas would be appreciated. Sorry forgot to mention it's a Hymer b584 2002 model
Attachments
Last edited: