2006 2.2HDi gearbox fill

Discussion in 'Peugeot' started by stevec, Jul 1, 2014.

  1. stevec

    stevec Funster

    Joined:
    Sep 24, 2013
    Messages:
    609
    Likes Received:
    204
    Location:
    Norwich
    Can anyone advise me where the filling point for the gearbox is? Its a late X244 Peugeot Boxer chassis.
     
  2. dave newell lvs

    dave newell lvs Trader-Vehicle Services

    Joined:
    Oct 31, 2008
    Messages:
    2,515
    Likes Received:
    3,319
    Location:
    Telford, Shropshire
    Through the hole left when you remove the reverse light switch, yes really.

    D.
     
  3. stevec

    stevec Funster

    Joined:
    Sep 24, 2013
    Messages:
    609
    Likes Received:
    204
    Location:
    Norwich
    Thanks. I guess this isn't the "fill til it comes out" hole? Presumably put back in whatever amount comes out.

    And the reverse light switch is where exactly.......just been to have a look and d**ned if I can see it.
     
    Last edited: Jul 1, 2014
  4. stevec

    stevec Funster

    Joined:
    Sep 24, 2013
    Messages:
    609
    Likes Received:
    204
    Location:
    Norwich
    I've still not actioned my gearbox fill. I have found out from Peugeot how much oil (2.7 litres). But I can still not find a fill point. I have located the speedo sensor but can't find the reverse switch. Any clues Dave?
     
  5. stevec

    stevec Funster

    Joined:
    Sep 24, 2013
    Messages:
    609
    Likes Received:
    204
    Location:
    Norwich
    Just to bump this up. Had another look this morning. Can find no reverse light switch unles it's buried under the air filter pipework. Speedo sensor is the only obvious fill point. If I remove this will anything drop off the end of it?
     
  6. Badknee

    Badknee Funster

    Joined:
    Aug 25, 2014
    Messages:
    3,642
    Likes Received:
    15,268
    Location:
    notloB
    That's deffo not the way to do it IMO.
     

Share This Page