Hi...someone has flagged this add up to me as they know I made a base plate up for a snipe some time ago..
If you can source a piece of alloy plate around 6mm thick from memory..you can cut that to shape and use the body of the snipe as a template to mark out the bolt hole locations.. from memory I used riv nuts to form the threaded holes..
Plate was mastic to the roof and the body bolted down on to the plate..
It's an option anyway if you are stuck..
Andy...
If you can source a piece of alloy plate around 6mm thick from memory..you can cut that to shape and use the body of the snipe as a template to mark out the bolt hole locations.. from memory I used riv nuts to form the threaded holes..
Plate was mastic to the roof and the body bolted down on to the plate..
It's an option anyway if you are stuck..
Andy...