Need new glass sink lid - Help (1 Viewer)

[Cazmci]

Hi, we have a Auto-sleepers Orian Dorado, last year the glass sink lid shattered everywhere, I need to buy a new one, where is the best place to get one? Our motorhome is similar to this and you will see the glass lid https://www.autotrader.co.uk/motorhome-details/202312054561901?advertising-location=at_motorhomes

Many thanks

 

[Jim]

Hi
Just to let you know that you aren't being ignored. Your post has only just this minute gone live. We manually check and approve new members first few posts that have links within just to ensure they are not spammers. Your post was just approved; people can see it now Thanks.

 

[Two on Tour]

Hi, we have a Auto-sleepers Orian Dorado, last year the glass sink lid shattered everywhere, I need to buy a new one, where is the best place to get one? Our motorhome is similar to this and you will see the glass lid https://www.autotrader.co.uk/motorhome-details/202312054561901?advertising-location=at_motorhomes

Many thanks

It looks like it may well be a Thetford sink you have and it's possibly a Spinflo Argent like this one.

Replacement Thetford Spinflo Argent sink glass lid

One Replacement glass lid for the Thetford spinflo sink. Fittings not inc 59.5 cm x

www.olearymotorhomes.co.uk

We had a PVC which was missing the sink lid when we bought it, and I made a new lid from Perspex.

^{_{Subscribers  do not see these advertisements}}

 

[Nanniemate]

I don't get why manufacturers use glass . I hope you can find a replacement. Maybe consider wood or metal

 

[RandallC]

We removed our glass sink cover (rapido 8096df) and replaced it with a bamboo chopping board. Had to cut and shape to glass profile. Now have relatively knife friendly heat resistant surface, that doesnt shatter is anything dropped on it.

Just added leave open if sink wet to avoid the dreaded black mold stuff if left closed when you get home.

 

[Viennese]

I think I would ask the manufacturer Autosleepers.

^{_{Subscribers  do not see these advertisements}}

 

[Cazmci]

Thanks for the feedback, I will have a look. Also does anyone know the type of material they use for the seating? Not the same pattern but the same thick woven material? Would like to get driver and passenger seats done. Thanks

 

[MisterB]

Thanks for the feedback, I will have a look. Also does anyone know the type of material they use for the seating? Not the same pattern but the same thick woven material? Would like to get driver and passenger seats done. Thanks

have you considered seat covers, there are some high quality ones out there ....

 

[Masman]

Depending where in the country you are. I had my seats re covered at A1 Trimmers. Nottingly.Did a great job.

^{_{Subscribers  do not see these advertisements}}

 

[Barclaybasher]

Made a sink cover out of a resin chopping board off ebay.
My old Burstner had a wooden one - just put a hole in it for lifting out and ventilation

 

[Tonks]

Thanks for the feedback, I will have a look. Also does anyone know the type of material they use for the seating? Not the same pattern but the same thick woven material? Would like to get driver and passenger seats done. Thanks

If you let folk know whereabouts in the country you are (roughly), I'm sure you'll get some good recommendations for companies to do this.

 

[busby]

Local glass merchant will cut you one..They stock most types of glass
BUSBY.

^{_{Subscribers  do not see these advertisements}}

 

[Lenny HB]

Local glass merchant will cut you one..They stock most types of glass
BUSBY.

Needs to be toughened glass so they will have to order it in.

 

[busby]

Needs to be toughened glass so they will have to order it in.

Probably.
BUSBY..

 

[PG’s trips]

As Busby got made in local fireplace glass maker. Took a template got it made and painted to match the sink, £80. Thetford no longer did it.

^{_{Subscribers  do not see these advertisements}}

 

[Two on Tour]

As Busby got made in local fireplace glass maker. Took a template got it made and painted to match the sink, £80. Thetford no longer did it.

The real thing is in stock at O'Leary's for 80 quid, seems the easy option to my.

 

[offagen]

I had to replace a shattered glass sink lid last year. The manufacturer could only supply the whole sink unit, appropriately priced. I made a thick card template and went to a local glazier. They made up a lid in matching tinted glass then sent it off to be toughened. The cost was under £50.

 

[TheBig1]

as above, a thick card or thin ply cover cut and drilled to fit and then get it copied in toughened glass. Another tip is laminate it with transparent adhesive safety film.