Led bulbs

Discussion in 'Tech/Mech General' started by JohnM, Nov 2, 2011.

  1. JohnM

    JohnM Read Only Funster

    Joined:
    Nov 8, 2008
    Messages:
    651
    Likes Received:
    179
    Location:
    Central Scotland
    After fitting day running lights [drl] to my Rapido I would like to replace my side lights & marker bulbs to led. I have checked the Rapido manual for correct bulb replacement and are as follows 2x12v lw sram ? and 2x12v wsw? I don't know what to look for. I have tried a google search with no luck. Hope a funster can point me in the right direction for supplier and type of led bulb to look for :thumb:
     
  2. hilldweller

    hilldweller Funster Life Member

    Joined:
    Dec 5, 2008
    Messages:
    26,432
    Likes Received:
    25,110
    Location:
    Macclesfield
    Why ?

    If the engine is running what does it matter what current they take ?

    If a CANBUS vehicle the LEDs will need a resistor to draw the same current or else the blown bulb warning will be permanently on.
     
    • Like Like x 1
Loading...

Share This Page