Terry
LIFE MEMBER
Thought this may be helpful
pic 1 shows what is wrong
remove the covers around the edges and unscrew the whole frame
The arm is simply lifted out of the slot and the small plastic insert had become unscrewed ( in this case ) simply screw this back onto the roller, then the inner arm in pic 3 can be wound clockwise until desired tension is reached and simply popped back into slot, then re screw the whole frame back into position, clip on covers, time for coffee job done :thumb:total time 5 / 10 mins max
terry
pic 1 shows what is wrong
remove the covers around the edges and unscrew the whole frame
The arm is simply lifted out of the slot and the small plastic insert had become unscrewed ( in this case ) simply screw this back onto the roller, then the inner arm in pic 3 can be wound clockwise until desired tension is reached and simply popped back into slot, then re screw the whole frame back into position, clip on covers, time for coffee job done :thumb:total time 5 / 10 mins max
terry