Rapido 7090F Thetford C200 reposition

Techno

LIFE MEMBER
Deceased RIP
Joined
Jul 28, 2010
Posts
15,475
Likes collected
20,773
Location
Leeds the one up North
Funster No
12,905
MH
Rapido 7090F 3 litre 160
Exp
May 2010
We always found the toilet to be too close to the outside wall for comfort especially with the corner cabinet. So I am in the throws of moving it.

This is the normal position of the throne :Sad:

CA_02221416330342-M.jpg

CA_02221416335412-M.jpg


It can be moved to here
CA_02221416320005-M.jpg

CA_02221416314132-M.jpg


Frames made up already and cost nothing as it is left over ply from the new bedroom floors
CA_02221416280540-M.jpg


To be continued............
 
Last edited:
Next thing you could do is build an extension. :Smile:
How about a slideout.
 
:Doh: I wish you hadn't suggested that :Laughing:

Toilet in the open air :Rofl1:
 
Last edited:
The only reason I made the frames so tall was in an effort to hide the veneer damage from the sticky velcro tape (previous owner) either removed or left behind. I managed to remove all the left behind ones with nail polish remover but there's no fix for the ones taken off already :(
CA_02231416333589-M.jpg


Anyway I've lived with it over a year now so I'm reducing the frames to the minimum so less to see.

I tried the layout today (now cutting down at home) and even sat on the throne to try it. :lol:

Plinth repositioned
CA_02231416384820-M.jpg


CA_02231416392106-M.jpg


CA_02231416394336-M.jpg


CA_02231416400780-M.jpg


To be continued............
 
Looking good, not thought of making your infill piece smaller though?
Personally just thought it would look better at just above the cassette housing height.
Also liked the bedroom floor mod but didn't see any pics of the floor finish.:thumb:
what were the floor spports made from?

Subscribers  do not see these advertisements

 
Looking good, not thought of making your infill piece smaller though?
Personally just thought it would look better at just above the cassette housing height.
Also liked the bedroom floor mod but didn't see any pics of the floor finish.:thumb:
what were the floor spports made from?

That is what I just said in the previous post :Wink:


floor support frame 9mm ply Broken Link Removed
 
Last edited:
You must have access to a good workshop the floor supports looked bought in.
 
:Eeek:If I tried that I'd end up living in the shed:Sad:
 
This is the frame size now Jay, hardly any will be visible
CA_02231418385174-M.jpg
 
Last edited:
Much better:thumb:

You're not too far away, can I bring mine round & borrow your kitchen?
 
Last edited:
You can see what's going on here Jay. I used a piece of the old wheel arch covers.
I just need a top now :thumb:
CA_02231419462966-M.jpg

CA_02231419470941-M.jpg


To be continued......................
 
now I've heard of people fitting a cat flap into a motorhome door but this is more a shat flap:Rofl1:

seriously though well done should be an excellent jobbie, I mean job, when finished. in its original position, i would have to lean to one side so my shoulder didn't hit the cupboard above
 
It wont be a tight squeeze anymore :Laughing:
A bonus is a much better run for the SOG pipe, it was always restricted for space. The move is only 110mm but a whole world of a difference.

Subscribers  do not see these advertisements

 
Not got the piece off the other wheelarch for the top?
 
Our Rapido has the loo in a similar position and has the same cupboard, however our worktop thing where the washbasin is is deeper than yours so the loo is in much the same position as yours will be once moved. The extra space in the cassette compartment is useful though, as although we don't have a SOG there is room in the compartment for 3/4 bottles of bio liquid and a can of air freshener. (edit) and the outside shower.

Subscribers  do not see these advertisements

 
SOGs are real easy on these no need to put in the door as is typical.
CA_02141422195615-L.jpg
 
All fitted and working just need something suitable to cap it off in good time.
CA_02241414524357-M.jpg


CA_02241414533797-M.jpg


CA_02241414535780-M.jpg


CA_02241414541261-M.jpg


CA_02241414543325-M.jpg


CA_02241414550202-M.jpg


CA_02241414552540-M.jpg


CA_02241414555081-M.jpg


This is a reflection of the seating position now :Laughing: So you can imagine how much more of a pain that corner was before the move. I can actually lean right back to the wall now.

CA_02241414515363-M.jpg


To be continued....................
 
Last edited:
clicked LIKE because of the excellent photos, except the last.....looks like you had a burglar in the van. that should be shown on crime watch:Eeek:

maybe its a turd burglar :Rofl1:
 
Well done Andy, another inspirational job. :thumb:

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top