Wheel Bolts (1 Viewer)

OP
OP
Paulypaul
Feb 2, 2019
1,059
2,503
Norfolk
Funster No
58,334
MH
Pilote G740C
Exp
2018
Can i ask whee did you source the wheels from & at what cost?

Karl
I bought them privately from a fella who was doing a van conversion....then changed his mind. I saved quite a bit too but I had to travel quite far to collect them.
 
Apr 3, 2019
1,470
2,712
UK
Funster No
59,597
MH
Burstner Travel Van
Exp
Few years now
Just to resurrect an old thread. I am planning to swap the 15" steel wheels ( 118pcd) on my Fiat light chassis van for a set of the standard 16" Fiat alloys.
For those who have done the swap, can you confirm you used the same wheel bolts?
Thanks
 
OP
OP
Paulypaul
Feb 2, 2019
1,059
2,503
Norfolk
Funster No
58,334
MH
Pilote G740C
Exp
2018
Yes I can confirm that and I got that information from a fiat commercial dealer. Hope that helps.

Subscribers  do not see these advertisements

 
OP
OP
Paulypaul
Feb 2, 2019
1,059
2,503
Norfolk
Funster No
58,334
MH
Pilote G740C
Exp
2018
I don't know but I have the specs of the wheels and nuts that I had fitted and the spec of the wheel I wanted to fit and they came back to me stating that the wheel nuts were the same.

There are many very helpful and knowledgable people on here who may give you more detailed information.

Subscribers  do not see these advertisements

 
Apr 6, 2019
3,694
7,302
Eye, Peterborough, UK
Funster No
59,702
MH
RV
Exp
FourWinds Windsport 6.8L V10
Don't know if it helps but my old MH had 16" Ducato wheels,definitely PCD130, not 118 as found on the 15". (1999 vehicle)
 
Sep 17, 2017
5,337
9,945
Birmingham, UK
Funster No
50,575
MH
A-Class
Exp
2017
I doubt you can swap from 15 to 16.
Speedo will not read correct for starters.
Clearance on suspension may also be an issue.

Andy
I see this a lot and I don't think it's correct. Surely it depends on what size tyres you fit? You can get bigger rims, provided you get a tyre with a lower profile sidewall. If you end up with the same overall diameter (to within a couple of percent), it won't make a difference.

And suspension clearance is only likely to make a difference if you go wider or change the offset.
 
Apr 3, 2019
1,470
2,712
UK
Funster No
59,597
MH
Burstner Travel Van
Exp
Few years now
I had it confirmed that the 16" Fiat Alloys, I will be fitting are a 118PCD.
If not watch the classifieds next week.

Subscribers  do not see these advertisements

 
OP
OP
Paulypaul
Feb 2, 2019
1,059
2,503
Norfolk
Funster No
58,334
MH
Pilote G740C
Exp
2018
These are the 16" alloys I put on with 118pcd and used the same wheel bolts.
 

Attachments

  • 20190926_145454.jpg
    20190926_145454.jpg
    321.3 KB · Views: 6

Grummyb

Free Member
Dec 31, 2020
714
2,205
Corby
Funster No
78,662
MH
Coachbuilt
Exp
Since about 2013
Some alloys use same nuts or bolts as steel , and not all alloys use same nuts or bolts as other alloys
safest answer is to visit dealer and look in parts book to see part numbers for the different options .
I don't think fealets have parts books anymore and if you can't give the number on the parts counter the reg no he won't know what your talking about
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top