We are setting off tomorrow for a trip to Portugal. The van (a 2012 Bailey 620 Approach) was winterised and we filled up the fresh water tank today using the whale pump and an aquaroll. Trouble is the LCD display wasn't responding even though water was clearly being pumped into the tank. Eventually the tank stopped filling but the LCD showed only thirty nine percent full.
We know that's wrong as we used over two aquarolls which is over eighty litres.
We tried turning the master switch off and on again to see if it would reset but to no avail.
There are instructions in the resources section for calibrating a water tank for a Bailey Autograph. Anyone know whether this will work for the Approach? We can't try it until we have used up the water as you need to start with an empty tank.
Thanks
We know that's wrong as we used over two aquarolls which is over eighty litres.
We tried turning the master switch off and on again to see if it would reset but to no avail.
There are instructions in the resources section for calibrating a water tank for a Bailey Autograph. Anyone know whether this will work for the Approach? We can't try it until we have used up the water as you need to start with an empty tank.
Thanks