Water level indicator fault (1 Viewer)

OldWomble

Free Member
Feb 22, 2015
141
123
West Sussex
Funster No
35,205
MH
AS Kemerton XL
Exp
25 years
Morning all and Happy New Year

Both the level indicators on our Auto-Sleepers PVC are showing inaccurate readings. The fresh tank shows 1/4 full when it’s completely empty and the waste tank also shows 1/4 when that is full to the brim.
So far, I have drained and cleaned both tanks with tank cleaners and citric acid, flushed them several times and then checked everything again. No change!
I then removed the sensors from the fresh tank, cleaned them and refitted them. No change!
I have now disconnected the wiring from the lower three sensors on the fresh tank and still the gauge shows 1/4 full. This tells me there is something wrong with the control system. Would any of you know if there is any adjustment on the sensitivity? It’s a Sergeant EC700 unit.
 
OP
OP
OldWomble

OldWomble

Free Member
Feb 22, 2015
141
123
West Sussex
Funster No
35,205
MH
AS Kemerton XL
Exp
25 years
alternatively, has anyone ever ripped out the Sargent unit and retrofitted something that works?
 
OP
OP
OldWomble

OldWomble

Free Member
Feb 22, 2015
141
123
West Sussex
Funster No
35,205
MH
AS Kemerton XL
Exp
25 years
Oops, sorry it’s an EC500 with a 480 display.

Subscribers  do not see these advertisements

 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Funsters who are viewing this thread

Back
Top