Waste system pipes (1 Viewer)

[acropolis22]

Has anyone had to change the pipework and valves underneath? Previous owner changed drains to UK nearside. Poorly. Weird materials and leaks. Any suggestions for best source of pipes and ball valves? The sheer variety of non matching systems and sizes is driving me mad. It's a G650L.

 

[Lenny HB]

Have a look at CAK Tanks they keep most of the bits continental Motorhomes use.

Llink to online shop

LeisureLines by Caravan Accessories C.A.K. Tanks

LeisureLines.net online shop for Motorhome Campervan Caravan Accessories Spare Parts Fresh Water Tanks, Water pumps, Plumbing , Heating , One stop availability and expertise for self builders. Thetford Dometic Shurflo Fiamma Sog Whale Propex Smev Seitz Truma Waeco Can Cramer Teleco and many...

leisurelines.net

 

[jockaneezer]

After a tyre blow out ripped off my waste tank drain and valve, I got replacement parts from a local koi carp stockist. Normal plumbing supply shops didn't keep any of the sizes I needed.

^{_{Subscribers  do not see these advertisements}}

 

[Sasbo]

Pilote like most French manufacturers use 40mm OD pipework which is not the same as UK standard waste pipe.

Link to eBay vendor who has all the pipe and fittings you should need.

40 mm PVC Solvent Weld Fittings and PRESSURE pipe, will NOT fit waste pipe!!! | eBay

Tank, bulkhead connector with female socket ends. Pipe can be fitted INTO both ends. R equires a 39 to 40 mm tank hole. The back nut is also the socket making this a compact fitting, however be aware that if pipe is glued to both ends fitting cannot then be removed or tightened without rotating...

www.ebay.co.uk

 

[TheBig1]

I installed an electric dump valve to our van and had reducers 3d printed to fit the random size pipe used by rapido

 

[acropolis22]

Pilote like most French manufacturers use 40mm OD pipework which is not the same as UK standard waste pipe.

Yes, you are right. I'm finding this out the hard way.

^{_{Subscribers  do not see these advertisements}}

 

[Stealaway]

My German van uses 40mm solvent weld pipe and fittings. Search eBay.

 

[kmacdon]

My pilote has a manual drain which you pull to open unfortunately it’s in the centre of the van. It is a weird size any ideas of an adaptor to push in hole which will allow me to use a fully serviced pitch.

 

[TheBig1]

have one 3d printed to suit your choice of pipe. PaulandChrissy can usually offer this service

^{_{Subscribers  do not see these advertisements}}

 

[Ian Bosman]

Pilote like most French manufacturers use 40mm OD pipework which is not the same as UK standard waste pipe.

Link to eBay vendor who has all the pipe and fittings you should need.

40 mm PVC Solvent Weld Fittings and PRESSURE pipe, will NOT fit waste pipe!!! | eBay

Tank, bulkhead connector with female socket ends. Pipe can be fitted INTO both ends. R equires a 39 to 40 mm tank hole. The back nut is also the socket making this a compact fitting, however be aware that if pipe is glued to both ends fitting cannot then be removed or tightened without rotating...

www.ebay.co.uk

A number of Continental use 40 mm which gives better draining and filling. My water inlet is 40 mm as is the drain from waste and fresh. You have to keep to the side of the drain pipe when opening the valve otherwise you get very wet feet.

 

[Ian Bosman]

My pilote has a manual drain which you pull to open unfortunately it’s in the centre of the van. It is a weird size any ideas of an adaptor to push in hole which will allow me to use a fully serviced pitch.

Does it have a bayonet fitting on the exposed end. Mine does which means a length of 40mm flexible pipe comes in handy when draining into the dump in that you do not have to be over it on the site just within range of the flexible

 

[kmacdon]

Thanks for the suggestions

^{_{Subscribers  do not see these advertisements}}

 

[PaulandChrissy]

If you need something special made, let me know. We are off to Spain at the end of the month, so if you do need something don’t leave it toooo late in the month.

PaulandChrissy