Gerryatric71
Free Member
- Aug 15, 2017
- 38
- 1,319
- Funster No
- 50,002
- MH
- Hymer B504 SL 2007
- Exp
- Since Adam and Eve built one !
I purchased the Votronic lead ( Article 2007) to connect a Votronic MPPT 250 to my EBL 101 electroblok.
The instructions are straight forward however I have query. The X lead connects the output from the solar controller to the electroblok with a three slot plug which is shaped so only fits one way however the instructions (to me) indicate that the violet cable is the positive and is positioned at the top of this three pin connector but the socket on my ebl means due to the shaped plug/socket it is at the bottom.
Either the loom is wrong or I am misunderstanding the diagram.
I have tried to find a wiring diagram of the ebl 101 but no luck.
Can any expert help as the rest of the wiring is ready to go and I cant afford to bugger up the ebl.
The instructions are straight forward however I have query. The X lead connects the output from the solar controller to the electroblok with a three slot plug which is shaped so only fits one way however the instructions (to me) indicate that the violet cable is the positive and is positioned at the top of this three pin connector but the socket on my ebl means due to the shaped plug/socket it is at the bottom.
Either the loom is wrong or I am misunderstanding the diagram.
I have tried to find a wiring diagram of the ebl 101 but no luck.
Can any expert help as the rest of the wiring is ready to go and I cant afford to bugger up the ebl.