TV 12v Power

[Moto GBR]

I have recently purchased a MH that came with an Avtex TV. It is plugged into the normal UK 3 pin socket then a transformer thing then into the TV. How do I use it on a 12v supply only? Do I need another lead as it has only came with the lead explained above or would this one work?

TA Steve

 

[ontheroadagain]

You will need a 12V lead. The lead you have will only work on ehu.

 

[Moto GBR]

OK, Thanks

 

[canopus]

Does the MH have an inverter fitted? If not the previous owner may have only watched it when van connected to mains hook up.

 

[Moto GBR]

No inverter, Ta

^{_{Subscribers  do not see these advertisements}}

 

[ontheroadagain]

Like this -

AVTEX TV 3 Pin Lead 12v & 24v For All 3 Pin Avtex Models having a 3pin connector | eBay

For Avtex L186DRS/L187DRS/L188DR, /L216DRS/L217DRS/L236DRSL247DRS, and All Other Avtex models having the 3 pin socket. Fully Compatible Avtex 3 pin Lead 1.250mt Long 16Amp = 18 AWG, With Outer Walled Cable And Core Filter.

www.ebay.co.uk

 

[Moto GBR]

 

[fat haggis]

You need this.

Avtex TV 3Pin12v&24 1.5mt Lead 16amp cable, WILL FIT ALL AVTEX TV, 3 PIN MODELS | eBay

For Avtex L186DRS/L187DRS/L188DR, /L216DRS/L217DRS/L236DRSL247DRS, and all other Avtex models having the 3 pin socket. Fully Compatible Avtex 3pin 1.5mt Long 16Amp =18 AWG, With Outer Walled Cable. Avtex L249DRS PRO.

www.ebay.co.uk

 

[Moto GBR]