Thetford ct4110s electrical connection.

Joined
Jun 20, 2022
Posts
577
Likes collected
1,006
Funster No
89,375
MH
Just looking
Help please with wiring.
Can anyone walk me through how to connect the 2 wiring connectors.
Downloaded the manual but the wiring diagram doesn't help.
Also, Can a shurflo pump be used or does it need to be a very low pressure pump, f so which one?
Thanks in advsnce.
 
That's not one I'm familiar with 🤔

Screenshot_20220620-104522_Opera.jpg

Can post the diagram you have?
 
usually theres four connectors 2 are live and earth two are microswitch connections if you have an in tank pump with micro switches in the taps not this model but i think mine already had a link wire in the terminals that are for the micro switch
 
Hi, thanks for your ideas. Have posted some photos of the connectors. There are 2 12v+ inputs, 2 outputs and common earth's. The connectors are wired to the control unit / level indicator / flush button which seems to have 2 spare terminals. What are they for? Why 2 outputs? Could I use a non pressurised pump in the water tank to supply the toilet, powered by 1 of the outputs or would it get power when the flush
button is operated? Will take more photos if necessary. Thanks.
IMG_20220619_163848191_HDR.jpg
IMG_20220619_163803384_BURST001.jpg
IMG_20220619_163607077_BURST000_COVER.jpg

Subscribers  do not see these advertisements

 
Some more info on the connector blocks.
The big one has terminals for +input, - and + output. This output is the red wire to the small block and up to the control panel. Blue wire comes back to the big block as output but also to small block also with output terminal from it.
 

Join us or log in to post a reply.

To join in you must be a member of MotorhomeFun

Join MotorhomeFun

Join us, it quick and easy!

Log in

Already a member? Log in here.

Latest journal entries

Back
Top