Smart Bms App For Daly Bms (1 Viewer)

[arthur49]

Smart BMS App for Daly BMS

My app updated automatically to v2.4.0 on 23 Dec. I now can't connect to my batteries! Version includes an update to BMS firmware which fortunately I did not attempt as reading reviews it basically appears to disable the BMS!

So if you have Smart BMS app suggest you don't update and certainly don't attempt firmware update until fix has been applied. Check reviews on PlayStore

 

[Ditcha]

Smart BMS App for Daly BMS

My app updated automatically to v2.4.0 on 23 Dec. I now can't connect to my batteries! Version includes an update to BMS firmware which fortunately I did not attempt as reading reviews it basically appears to disable the BMS!

So if you have Smart BMS app suggest you don't update and certainly don't attempt firmware update until fix has been applied. Check reviews on PlayStore

I have just had the same as you and reverted back to version 2.2.8 uninstall the update and then install this version it's my Dropbox account.

Dropbox - File Deleted - Simplify your life

www.dropbox.com

 

[G7UXG]

Not had any major problems with the app on an iPhone. However, it doesn’t show the in/out current until a few amps is being used/charged. Anyone know of a fix for this?

 

[Ditcha]

Bart did the download work okay for you or have you reverted back to the old version?

 

[arthur49]

Bart did the download work okay for you or have you reverted back to the old version?

Sorry, no, it didn't work!

On 29/12/22 another update was released v2.4.3 so I installed it but makes no difference. I suspect the issue I have is the firmware update stalled and BMS is locked up.

I am far from alone...........

^{_{Subscribers  do not see these advertisements}}

 

[Ditcha]

Sorry, no, it didn't work!

On 29/12/22 another update was released v2.4.3 so I installed it but makes no difference. I suspect the issue I have is the firmware update stalled and BMS is locked up.

I am far from alone...........

Terrible that it wouldn't let me install anything it kept asking fore a code in order to do so.
Is the BMS still functional or bricked?

 

[arthur49]

Is the BMS still functional or bricked?

Not sure. I can't tell the state of charge from BMS, no idea if low temp cut off has stopped charging - I had it set at +3 degrees. 40A B2B is showing a charge of 5A - is that because of low temp or BMS problem? No idea ...

 

[Ditcha]

Not sure. I can't tell the state of charge from BMS, no idea if low temp cut off has stopped charging - I had it set at +3 degrees. 40A B2B is showing a charge of 5A - is that because of low temp or BMS problem? No idea ...

Hope you get it sorted

 

[arthur49]

For anyone else who suffers from this Daly shambles this is what the app interface looks like. The battery is on the kitchen table connected to nothing but there is a 15A load? And its one nominal 12.8v battery in unknown state of charge yet its 60% SOC with dial showing zero .... and 26.4v?

 

[Jo662]

I checked my batteries yesterday,2x 100ah lithium. On the Victron app it says they were on 86% soc,but on the BMS app it said each battery was on 100% soc.
Which one is correct I wonder.

^{_{Subscribers  do not see these advertisements}}

 

[Ditcha]

For anyone else who suffers from this Daly shambles this is what the app interface looks like. The battery is on the kitchen table connected to nothing but there is a 15A load? And its one nominal 12.8v battery in unknown state of charge yet its 60% SOC with dial showing zero .... and 26.4v?

I have just updated to 2.4.3 all okay doesn't ask to update the firmware few different features.

 

[arthur49]

I have just updated to 2.4.3 all okay doesn't ask to update the firmware few different features.

View attachment 701128

View attachment 701127

I note you have BMS software upgrade (firmware?). I wouldn't touch that until some others have tested it? Does the previous code 123456 still work if you want to adjust parameters? It would be great to set your own code though

 

[Ditcha]

I note you have BMS software upgrade (firmware?). I wouldn't touch that until some others have tested it? Does the previous code 123456 still work if you want to adjust parameters? It would be great to set your own code though

Definitely not touching that button until further feedback you can set your own code in parameter settings last page at the bottom reset password

 

[arthur49]

Looks like a good update then. Pity it froze so many BMS!

 

[Bart]

Bart did the download work okay for you or have you reverted back to the old version?

I didn't have to use it , I just downloaded it Incase my app accidentally updated and I was screwed

^{_{Subscribers  do not see these advertisements}}

 

[arthur49]

Just an update on this. I'll not name the reputable UK dealer from whom I bought 2 lithiums over a year ago ...... at the moment!
But latest I hear is they are in discussion with Daly. Appears the bluetooth capability has been frozen and since batteries are in a sealed plastic box fixing is not going to be easy.
The batteries charge and discharge OK but how do I know the safety parameters, balancing of cells etc is OK?
Battery supplier is looking to an external shunt solution - that may be more accurate with total battery voltage, current etc, but useless as far as managing the batteries.

 

[bigtwin]

Battery supplier is looking to an external shunt solution

but useless as far as managing the batteries.

Indeed. I wouldn’t countenance that proposal as anything like a solution.

Ian