Sargent reverse camera mirror

[jon cole]

Hi can anyone help please,I tried to connect my mirror up and had cable 180 deg out therefore bending pins on male socket ,mirror end,the plug is moulded so I tried to dissect and see what coloured wire went to which pin,no go on that it's factory welded? So question is I have obtained a new solderable mini din 6 pin plug but don't have a wiring diagram, I have 5 wires to refix,new mirror £110 from sargent, so looking for a cheaper fix,many thanks, jon

 

[sonar]

Hi can anyone help please,I tried to connect my mirror up and had cable 180 deg out therefore bending pins on male socket ,mirror end,the plug is moulded so I tried to dissect and see what coloured wire went to which pin,no go on that it's factory welded? So question is I have obtained a new solderable mini din 6 pin plug but don't have a wiring diagram, I have 5 wires to refix,new mirror £110 from sargent, so looking for a cheaper fix,many thanks, jon

I have a fitted 6 pin socket I fitted to my dash for the removable camera Screen.
Removable leaves no marks on the screen and the socket is small
i wired it as so number 1 was red so the socket number one was red and so on
all the PIN numbers matched the socket numbers. So no wiring diagram required.

 

[tonka]

Have you asked sargent if they have the wiring diagram ??
They are usually very helpful.. On an older 2005 Autotrail I had the old Omniview system, camera went faulty and they gave me the pin out.

 

[jon cole]

Tech depth at sargent told me not repairable,buy a new one, didn't ask them for wiring diagram but initial response not very helpful